VRC7: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(mapper number) |
(→Mirroring Control ($E000): http://forums.nesdev.com/viewtopic.php?p=428#p428 claims there's more bits here?) |
||
Line 121: | Line 121: | ||
7 bit 0 | 7 bit 0 | ||
--------- | --------- | ||
E... ..MM | |||
| || | |||
| ++- [[Mirroring]] (0: vertical; 1: horizontal; | |||
| 2: one-screen, lower bank; 3: one-screen, upper bank) | |||
+--------- WRAM enable (1: enable WRAM, 0: protect) | |||
=== IRQ Control ($E008 - $F010) === | === IRQ Control ($E008 - $F010) === |
Revision as of 22:39, 28 January 2013
The Konami VRC7 is an ASIC mapper. In the iNES format, it's #85.
Overview
- Manufacturer: Konami
- PRG ROM size: Up to 512 KB
- PRG ROM bank size: 8 KB at $8000, $A000, and $C000
- PRG RAM: Up to 8 KB
- CHR capacity: Up to 256 KB (only two games released: one has 128 KB ROM, the other has 8 KB RAM)
- CHR bank size: 1 KB - swappable even when RAM instead of ROM
- Nametable mirroring: Controlled by mapper
- Subject to bus conflicts: No
See VRC7 pinout for chip pinout.
Registers
One wiring variant of the VRC7 uses A4 for registers ($x010), the other uses A3 ($x008). Although A5 is wired for sound registers on both ($x030, $x028), in the latter board the ceramic resonator believed necessary for the sound hardware to work is missing.
PRG Select 0 ($8000)
7 bit 0 --------- ..PP PPPP || |||| ++-++++- Select 8 KB PRG ROM at $8000
PRG Select 1 ($8010, $8008)
7 bit 0 --------- ..PP PPPP || |||| ++-++++- Select 8 KB PRG ROM at $A000
PRG Select 2 ($9000)
7 bit 0 --------- ..PP PPPP || |||| ++-++++- Select 8 KB PRG ROM at $C000
CHR Select 0 ($A000)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $0000
CHR Select 1 ($A010, $A008)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $0400
CHR Select 2 ($B000)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $0800
CHR Select 3 ($B010, $B008)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $0C00
CHR Select 4 ($C000)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $1000
CHR Select 5 ($C010, $C008)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $1400
CHR Select 6 ($D000)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $1800
CHR Select 7 ($D010, $D008)
7 bit 0 --------- CCCC CCCC |||| |||| ++++-++++- Select 1 KB CHR ROM/RAM at PPU $1C00
Mirroring Control ($E000)
7 bit 0 --------- E... ..MM | || | ++- Mirroring (0: vertical; 1: horizontal; | 2: one-screen, lower bank; 3: one-screen, upper bank) +--------- WRAM enable (1: enable WRAM, 0: protect)
IRQ Control ($E008 - $F010)
$E008, $E010: IRQ Latch $F000: IRQ Control $F008, $F010: IRQ Acknowledge
Many VRC mappers use the same IRQ system. For details on IRQ operation, see VRC IRQs.
Sound ($9010, $9030)
For details on sound information, see VRC7 Audio.