INES Mapper 003: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(NROM-368)
(Redirected page to CNROM)
Tag: New redirect
 
(16 intermediate revisions by 8 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers]]
#REDIRECT [[CNROM]]


'''iNES Mapper 003''' is used to designate the [[CNROM]] board and a very similar board used for Panesian games, generalized to support up to 255 banks (2040 KiB) of CHR ROM.
{{DEFAULTSORT:003}}
 
[[Category:iNES Mappers]] [[Category:in NesCartDB]] [[Category:CNROM-like mappers]] [[Category:Nintendo licensed mappers]] [[Category:Expansion audio]][[Category:NES 2.0 mappers with submappers]]
In May 2012, the [[NROM-368|CNROM-368]] extension was proposed, allowing 46 KB PRG ROM.
 
  Here are Disch's original notes:
  ========================
  =  Mapper 003          =
  ========================
 
  aka
  --------------------------
  CNROM (and compatible)
 
 
  Example Games:
  --------------------------
  Solomon's Key
  Arkanoid
  Arkista's Ring
  Bump 'n' Jump
  Cybernoid
 
 
  Registers (**BUS CONFLICTS** sometimes):
  --------------------------
    $8000-FFFF: [CCCC CCCC]
      CHR Reg (selects 8k @ $0000)
 
 
  Notes:
  ---------------------------
  CNROM has bus conflicts, however mapper 003 is meant to be CNROM and compatible. So some mappers which were
  similar in function, but did not have bus conflicts are included.
 
  Additionally, CNROM's reg is only 2 bits wide... therefore it is capped at 32k CHR.
 
  So to be "safe":
  - for homebrewing:  assume bus conflicts, do not exceed 32k CHR
  - for emudev:  assume no bus conflicts, use all 8 reg bits
 
  There is no PRG swapping.
 
 
  The game Cybernoid seems to behave very strangely.  It uses unprepped system RAM... and it is as if it
  actually relies on bus conflicts (AND written value with value read from address)!

Latest revision as of 13:44, 4 February 2025

Redirect to: