|
|
| (2 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| '''TFROM''' (NES-TFROM and HVC-TFROM) is a common board within the [[TxROM]] set. Like other TxROM boards, TFROM uses the [[MMC3|Nintendo MMC3]] ASIC.
| | #REDIRECT [[TxROM]] |
| | |
| == Overview ==
| |
| * PRG ROM size: 128, 256 or 512 KB (DIP-28/32 Nintendo pinout)
| |
| * PRG ROM bank size: 8 KB
| |
| * PRG RAM: None
| |
| * CHR capacity: 32 or 64 KB ROM (DIP-28 standard pinout)
| |
| * CHR bank size: 1 KB and 2 KB
| |
| * Nametable [[mirroring]]: Solder pads select horizontal, vertical or controlled by mapper.
| |
| * Subject to [[bus conflict]]s: No
| |
| | |
| == Solder Pad Config ==
| |
| * Normal mode : 'CL1' connected, 'CL2' connected, 'H' disconnected, 'V' disconnected.
| |
| * [[DEROM]] backward compatibility mode with Horizontal mirroring : 'CL1' disconnected, 'CL2' disconnected, 'H' disconnected, 'V' connected.
| |
| * [[DEROM]] backward compatibility mode with Vertical mirroring : 'CL1' disconnected, 'CL2' disconnected, 'H' connected, 'V' disconnected.
| |
| | |
| Note : In DEROM backward compatibility mode, mirroring is hardwired and IRQs are disabled. However, the additional bank switching modes available by the MMC3 that weren't available with the MIMIC-1 chip used on DEROM boards are still present.
| |
| | |
| == See also ==
| |
| *[[MMC3|Nintendo MMC3]]
| |
