TxROM
| TxROM |
| TBROM |
| TEROM |
| TFROM |
| TGROM |
| TKROM |
| TK1ROM |
| TKSROM |
| TLROM |
| TL1ROM |
| TL2ROM |
| TLSROM |
| TNROM |
| TQROM |
| TR1ROM |
| TSROM |
| TVROM |
The generic designation TxROM refers to cartridge boards made by Nintendo that use the Nintendo MMC3 mapper.
Board Types
The following TxROM boards are known to exist:
| Board | PRG ROM | PRG RAM | CHR | Comments |
|---|---|---|---|---|
| TBROM | 64 KB | 16 / 32 / 64 KB ROM | ||
| TEROM | 32 KB | 16 / 32 / 64 KB ROM | Supports fixed mirroring | |
| TFROM | 128 / 256 / 512 KB | 16 / 32 / 64 KB ROM | Supports fixed mirroring | |
| TGROM | 128 / 256 / 512 KB | 8 KB RAM/ROM | ||
| TKROM | 128 / 256 / 512 KB | 8 KB | 128 / 256 KB ROM | |
| TK1ROM | 128 KB | 8KB | 128KB ROM | Uses 7432 for 28-pin CHR ROM |
| TKSROM | 128 / 256 / 512 KB | 8 KB | 128 KB ROM | Alternate mirroring control, Famicom only |
| TLROM | 128 / 256 / 512 KB | 128 / 256 KB ROM | ||
| TL1ROM | 128 KB | 128 KB | Uses 7432 for 28-pin CHR ROM | |
| TL2ROM | Nonstandard pinout | |||
| TLBROM | 128 KB | 128 KB ROM | Uses 74541 to compensate for too-slow CHR ROM | |
| TLSROM | 128 / 256 / 512 KB | 128 KB ROM | Alternate mirroring control | |
| TNROM | 128 / 256, 512 KB | 8 KB | 8 KB RAM/ROM | Famicom only |
| TQROM | 128 KB | 16 / 32 / 64 KB ROM + 8 KB RAM | ||
| TR1ROM | 128 / 256 / 512 KB | 64 KB ROM + 4 KB VRAM (4-screen Mirroring) | NES only | |
| TSROM | 128 / 256 / 512 KB | 8 KB (no battery) | 128 / 256 KB ROM | |
| TVROM | 64 KB | 16 / 32 / 64 KB ROM + 4 KB VRAM (4-screen Mirroring) | NES only |
Solder pad config
Namco 108 backwards compatibility (TEROM and TFROM)
- Normal mode: 'CL1' connected, 'CL2' connected, 'H' disconnected, 'V' disconnected.
- Backwards compatible with horizontal mirroring: 'CL1' disconnected, 'CL2' disconnected, 'H' disconnected, 'V' connected
- Backwards compatible with vertical mirroring: 'CL1' disconnected, 'CL2' disconnected, 'H' connected, 'V' disconnected
Connecting 'CL1' enables MMC3-controlled mirroring, while connecting 'CL2' enables IRQs. However, the additional bankswitching modes available by the MMC3 that weren't available with the Namco chip used on DEROM boards are still present and activated by bits 7-6 of port $8000.
Battery retention (TNROM, TKROM and TKSROM)
- PRG RAM retaining data: 'SL' disconnected, Battery, D1, D2, R1 R2 and R3 present.
- PRG RAM not retaining data: 'SL' connected, leave slots for Battery, D1, D2, R1, R2 and R3 free.
Various notes
Boards with 4-screen mirroring uses a 8 KB SRAM chip, but only 4 KB is actually used. The 2 KB VRAM inside of the console is always disabled, and the CIRAM A10 pin of the MMC3 doesn't go to anything.
TLSROM and TKSROM boards have different mirroring control than other MMC3 boards. The mirroring is controlled directly by MMC3's CHR A17 line, and MMC3's CIRAM A10 pin doesn't go to anything. Due to their incompatibility with other MMC3 boards on a software viewpoint, they are assigned to INES Mapper 118 instead of mapper 4.
TQROM board has both CHR ROM and RAM. Bit 6 of the bank number, which appears on MMC3's CHR A16 line, controls whenever CHR RAM or CHR-ROM is enabled. A 74HC32 chip is used to combine this with other chip enable signals for the CHR-ROM and the CHR-RAM chips. Due to this incompatibility with the other MMC3 boards on a software viewpoint, this board is assigned to INES Mapper 119 instead of mapper 4.
