INES Mapper 020: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (then it isn't really used for carts and is thus categorized as "bad" per the definition in Mapper) |
m (typo fix) |
||
| Line 3: | Line 3: | ||
Ie. the mapper number is mostly intended for being internally used by emulators (to indicate to themselves that they are emulating the FDS hardware). | Ie. the mapper number is mostly intended for being internally used by emulators (to indicate to themselves that they are emulating the FDS hardware). | ||
The mapper number could be theoretically used for the FDS BIOS ROM-image, but this isn't done in practice. The FDS BIOS is typically | The mapper number could be theoretically used for the FDS BIOS ROM-image, but this isn't done in practice. The FDS BIOS is typically stored as [[NROM]] if it is dumped in [[iNES]] format, or it's stored as raw BIOS dump (without iNES header and thus without mapper number). | ||
Revision as of 20:13, 3 February 2013
Mapper 20 is defined as reserved for the Famicom Disk System (FDS) in official iNES specs. Ie. the mapper number is mostly intended for being internally used by emulators (to indicate to themselves that they are emulating the FDS hardware).
The mapper number could be theoretically used for the FDS BIOS ROM-image, but this isn't done in practice. The FDS BIOS is typically stored as NROM if it is dumped in iNES format, or it's stored as raw BIOS dump (without iNES header and thus without mapper number).
