INES Mapper 029
This mapper was allocated on 15-nov-2013 to implement some homebrew games, including Glider. FCEUX acquired support on r3029.
The example board in question was marked as follows: "Sealie Computing", "RET-CUFROM revD", "2/29/08"
The board includes 4x banks worth of full 8KB CHR ram, and 8x 16KB PRG banks.
It is hard-wired for vertical mirroring, and contains 8KB of WRAM mounted in the usual place. There is no battery, but pads are present and suitable for such a purpose if anyone were so inclined. There are no bus conflicts.
The board contains logic designed for reprogramming from a CopyNES. If EXP0 and R/W go low, /WR reaches the flash ROM. When EXP0 is high, the internal bankswitching register gets accessed.
Registers: --------------------------- Range,Mask: $8000-FFFF, $8000 $8000: [...P PPCC] C = CHR RAM bank P = PRG ROM bank PRG Setup: --------------------------- $8000 $A000 $C000 $E000 +-------------------------------+ | $8000 | { -1} | +---------------+---------------+ CHR Setup: --------------------------- $0000 $1000 +-------+-------+ | $8000 | +-------+-------+
Here's a schematic of the board:
377 O0 --- CRAM A13 377 O1 --- CRAM A14 ____ A14 ---------\ \ ) >--- ROM A14 377 O2 ------/____/ ____ A14 ---------\ \ ) >--- ROM A15 377 O3 ------/____/ ____ A14 ---------\ \ ) >--- ROM A16 377 O4 ------/____/ ____ EXP0 --------\ \ ) >--- ROM /WE R/W ---------/____/ ,--------------- 377 CLK | +--------------- ROM /CE | ____ /ROMSEL --+--| \ | )--, M2 ----------|____/ | ,-----------' | ____ `--| `-. | \ A14 ---------| )o-- RAM /CE | / A13 ---------|____,-' ____ EXP0 --------| `-. | \ +5V ---------| )o-- 377 /G | / ,------|____,-' | `------------------, ____ | +5V ------+--| `-. +-- RAM /OE | | \ | `--| )o-+-- ROM /OE | / R/W ------+--|____,-' | `--------------- RAM /WE