Battle Box

The Battle Box is a Famicom expansion port device holding 512 bytes of EEPROM.

The TC89102 EEPROMs used are similar to standard microwire EEPROMs, except that the address is entered before the command. These are configured for 8 bits of address and 16 bits of data.

Hardware interface

Input

($4017 Read)

7  bit  0
---- ----
xxxW Rxxx
   | |
   | +---- see below
   +------ Data line to the two EEPROMs

The data line toggles after each time this is read, so the actual value is the opposite of what was last read

($4016 Write)

7  bit  0
---- ----
xxxx xxxS
        |
        +- Clock line to the two TC89102 EEPROMs

If "S" is high during a read from $4017, it toggles which of two EEPROMs are enabled.

Output

($4017 Read)

7  bit  0
---- ----
xxxW Rxxx
   | |
   | +---- bitwise NOT of the value read from the EEPROM
   +------ see above

See also

Krzysiobal's reverse-engineered schematic and the TC89102 datasheet