PPU pattern tables

The pattern table is an area of memory connected to the PPU that defines the shapes of tiles that make up backgrounds and sprites. Each tile in the pattern table is 16 bytes, made of two planes. The first plane controls bit 0 of the color; the second plane controls bit 1. Any pixel whose color is 0 is background/transparent (represented by '.' in the following diagram):

Bit Planes            Pixel Pattern
$0xx0=$41  01000001
$0xx1=$C2  11000010
$0xx2=$44  01000100
$0xx3=$48  01001000
$0xx4=$10  00010000
$0xx5=$20  00100000         .1.....3
$0xx6=$40  01000000         11....3.
$0xx7=$80  10000000  =====  .1...3..
                            .1..3...
$0xx8=$01  00000001  =====  ...3.22.
$0xx9=$02  00000010         ..3....2
$0xxA=$04  00000100         .3....2.
$0xxB=$08  00001000         3....222
$0xxC=$16  00010110
$0xxD=$21  00100001
$0xxE=$42  01000010
$0xxF=$87  10000111

The pattern table is divided into two 256-tile sections: $0000-$0FFF, nicknamed "left", and $1000-$1FFF, nicknamed "right". The nicknames come from how emulators with a debugger display the pattern table. Traditionally, they are displayed as two side-by-side 128x128 pixel sections, each representing 16x16 tiles from the pattern table, with $0000-$0FFF on the left and $1000-$1FFF on the right.

An important aspect of a mapper's capability is how finely it allows bank switching parts of the pattern table.

Addressing

PPU addresses within the pattern tables can be decoded as follows:

DCBA98 76543210
---------------
0HRRRR CCCCPTTT
|||||| |||||+++- T: Fine Y offset, the row number within a tile
|||||| ||||+---- P: Bit plane (0: "lower"; 1: "upper")
|||||| ++++----- C: Tile column
||++++---------- R: Tile row
|+-------------- H: Half of sprite table (0: "left"; 1: "right")
+--------------- 0: Pattern table is at $0000-$1FFF