TFROM

From NESdev Wiki
Revision as of 14:35, 12 June 2009 by Banshaku (talk | contribs) (Created page with ''''TFROM''' (NES-TFROM and HVC-TFROM) is a common board within the TxROM set. Like other TxROM boards, TFROM uses the Nintendo MMC3 ASIC. == Overview == * PRG ROM s...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

TFROM (NES-TFROM and HVC-TFROM) is a common board within the TxROM set. Like other TxROM boards, TFROM uses the Nintendo MMC3 ASIC.

Overview

  • PRG ROM size: 128, 256 or 512 KB (DIP-28/32 Nintendo pinout)
  • PRG ROM bank size: 8 KB
  • PRG RAM: None
  • CHR capacity: 32 or 64 KB ROM (DIP-28 standard pinout)
  • CHR bank size: 1 KB and 2 KB
  • Nametable mirroring: Solder pads select horizontal, vertical or controlled by mapper.
  • Subject to bus conflicts: No

Solder Pad Config

  • Normal mode : 'CL1' connected, 'CL2' connected, 'H' disconnected, 'V' disconnected.
  • DEROM backward compatibility mode with Horizontal mirroring : 'CL1' disconnected, 'CL2' disconnected, 'H' disconnected, 'V' connected.
  • DEROM backward compatibility mode with Vertical mirroring : 'CL1' disconnected, 'CL2' disconnected, 'H' connected, 'V' disconnected.

Note : In DEROM backward compatibility mode, mirroring is hardwired and IRQs are disabled. However, the additional bank switching modes available by the MMC3 that weren't available with the MIMIC-1 chip used on DEROM boards are still present.

See also