INES Mapper 142

iNES Mapper 142 reportedly represents Kaiser's unlicensed reproduction of Super Mario Bros. 2 (FDS). Its UNIF board name is UNL-KS7032, and it features the KS202 ASIC, which is a subtle upgrade to Konami's VRC3.

Banks

• CPU $6000-$7FFF: 8 KB switchable PRG ROM bank
• CPU $8000-$9FFF: 8 KB switchable PRG ROM bank
• CPU $A000-$BFFF: 8 KB switchable PRG ROM bank
• CPU $C000-$DFFF: 8 KB switchable PRG ROM bank
• CPU $E000-$FFFF: 8 KB PRG ROM bank, fixed to the last bank.
• PPU $0000-$1FFF: 8 KB CHR RAM, unbanked

Registers

IRQ Reload value ($8000-$BFFF)

Writes set IRQ reload value, in four four-bit words, same as VRC3

IRQ Enable ($C000-$CFFF)

The only game writes $FF to enable, and $00 to disable. But it's credible that this register is also like VRC3.

IRQ Acknowledge ($D000-$DFFF)

Any write to this register will acknowledge the pending IRQ, like VRC3

Bank select ($E000-$EFFF)

Select one of four bank registers to update on next write to $F000.

7  bit  0
---- ----
.... .RRR
      |||
      +++- Specify which bank register to update on next write to Bank Data register
           0: Writes to $F000 have no effect
           1: Select 8 KB PRG bank at CPU $8000-$9FFF
           2: Select 8 KB PRG bank at CPU $A000-$BFFF
           3: Select 8 KB PRG bank at CPU $C000-$DFFF
           4: Select 8 KB PRG bank at CPU $6000-$7FFF
           5-7: unknown

Bank data ($F000-$FFFF)

7  bit  0
---- ----
.... DDDD
     ||||
     ++++- New bank value, based on last value written to Bank select register (mentioned above)

See also

• PCB photos