PPU OAM

OAM (Object Attribute Memory) contains a display list of up to 64 sprites, where each sprite's information occupies 4 bytes.

Byte 0

Y position of top of sprite

Sprite data is delayed by one scanline; you must subtract 1 from the sprite's Y coordinate before writing it here. Hide a sprite by writing any values in $EF-$FF here.

Byte 1

Tile index number

For 8x8 sprites, the tile number of this sprite. For 8x16 sprites:

76543210
||||||||
|||||||+- Bank ($0000 or $1000) of tiles
+++++++-- Tile number of top of sprite (0 to 254; bottom half gets the next tile)

Thus, the pattern table memory map for 8x16 sprites looks like this:

• $00: $0000-$001F
• $01: $1000-$101F
• $02: $0020-$003F
• $03: $1020-$103F
• $04: $0040-$005F
  [...]
• $FE: $0FE0-$0FFF
• $FF: $1FE0-$1FFF

Byte 2

Attributes

76543210
||||||||
||||||++- Palette (4 to 7) of sprite
|||+++--- Unimplemented
||+------ Priority (0: in front of background; 1: behind background)
|+------- Flip sprite horizontally
+-------- Flip sprite vertically

Byte 3

X position of left side of sprite

X-scroll values of F9-FF do NOT result in the sprite wrapping around to the left side of the screen.

DMA

Most programs write to a copy of OAM somewhere in CPU addressable RAM (often $0200-$02FF) and then copy it to OAM each frame using the OAM_DMA ($4014) register. This takes 513 cycles to copy 256 bytes from this memory into $2004, where an unrolled LDA/STA loop would usually take four times as long.

Sprite overlapping

Priority between sprites is determined by their address inside OAM. So to have a sprite displayed in front of another sprite in a scanline, the sprite data that occurs first will overlap any other sprites before it. For example, when sprites at OAM $0C and $28 overlap, the sprite at $0C will appear in front.

Notes

Each OAM entry is 29 bits wide. The unimplemented bits of each sprite's byte 2 do not exist in the PPU. On PPU revisions that allow reading PPU OAM through $2004, the unimplemented bits of each sprite's byte 2 always read back as 0. This can be emulated by ANDing byte 2 with $E3, either when writing to OAM or when reading back. It has not been determined whether the PPU actually drives these bits low or whether this is the effect of data bus capacitance from the last byte of the instruction ($20).