NINA-003-006

From NESdev Wiki
Revision as of 19:17, 30 July 2013 by Lidnariq (talk | contribs) (add cat:4020)
Jump to navigationJump to search

NINA-03 and NINA-06 are unlicensed boards produced by American Video Entertainment. They only differ in the nature of the CIC — the former always has a microcontroller, the latter may instead have a charge pump.

Overview

  • PRG ROM size: up to 64KB (mapper 79) or up to 256 KB (mapper 113)
  • PRG ROM bank size: 32 KB
  • PRG RAM: None
  • CHR ROM capacity: up to 64KB (mapper 79) or up to 128 KB (mapper 113)
  • CHR bank size: 8 KB
  • Nametable mirroring: hardwired to vertical or horizontal mirroring (mapper 79) or controlled by mapper (mapper 113)
  • Subject to bus conflicts: No

Banks

  • CPU $8000-$FFFF: 32 KB switchable PRG ROM bank
  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank

Registers

Control Register

This register is located at addresses:

F        bit      0
---- ---- ---- ----
010x xxx1 xxxx xxxx

That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.

7  bit  0
---- ----
MCPP PCCC
|||| ||||
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF
+---------- Select mirroring (clear: horizontal, set: verical)

The mirroring bit should only be honored on the board type used by HES 6-in-1, Mind Blower Pak, and Total Funpak (HES), which is mapper 113. On mapper 79, this bit is ignored.