NES 2.0 Mapper 324: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(pedantry) |
(bus conflicts, mapper 72 is similar) |
||
| Line 1: | Line 1: | ||
[[Category:Multicart mappers]] | [[Category:Multicart mappers]][[Category:Discrete logic mappers]] | ||
NES 2.0 Mapper 324 is used for Farid's homebrew 8-in-1 UNROM multicart board. It consists of an UNROM latch with an additional outer bank register. Mirroring is hard-wired. Its UNIF board name is '''FARID_UNROM_8-IN-1'''. | NES 2.0 Mapper 324 is used for Farid's homebrew 8-in-1 UNROM multicart board. It consists of an UNROM latch with an additional outer bank register. Mirroring is hard-wired. Its UNIF board name is '''FARID_UNROM_8-IN-1'''. | ||
| Line 5: | Line 5: | ||
Mask: $8000 | Mask: $8000 | ||
D~7654 3210 | D~7654 3210 **BUS CONFLICTS** | ||
--------- | --------- | ||
Cooo kIII | Cooo kIII | ||
| Line 21: | Line 21: | ||
==See also== | ==See also== | ||
[https://forums.nesdev.org/viewtopic.php?f=9&t=11099 NesDev discussion] | * [https://forums.nesdev.org/viewtopic.php?f=9&t=11099 NesDev discussion] | ||
* [[iNES Mapper 072|Mapper 72]] uses a similar "one latch's output clocks another latch" structure. | |||
Revision as of 18:09, 3 June 2018
NES 2.0 Mapper 324 is used for Farid's homebrew 8-in-1 UNROM multicart board. It consists of an UNROM latch with an additional outer bank register. Mirroring is hard-wired. Its UNIF board name is FARID_UNROM_8-IN-1.
Bank Register ($8000-$FFFF, write)
Mask: $8000
D~7654 3210 **BUS CONFLICTS**
---------
Cooo kIII
|||| ||||
|||| |+++- Standard UNROM inner bank (select 16K at $8000-$BFFF)
|||| +---- 1=Lock Outer Bank
|+++------ Select 128 KiB outer PRG-ROM bank
+--------- Clock Generator ("oook" bits latched only when this changes from 0 to 1)
The middle four bits ($78, lowercase) are one 74'161; their contents are explicitly zeroed on power-up or reset. The outer four bits ($87, uppercase) are the other 74'161; their contents are NOT.
UNROM latch ($8000-$FFFF)
See INES Mapper 002.
See also
- NesDev discussion
- Mapper 72 uses a similar "one latch's output clocks another latch" structure.
