INES Mapper 133: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (Small correction.)
(make demarcation between different hardware more obvious)
Line 7: Line 7:
   Bus conflicts for the mirror at $C100-$DFFF (don't do that)
   Bus conflicts for the mirror at $C100-$DFFF (don't do that)
   $4100: [.... .PCC] - Select 32 KiB PRG bank and 8 KiB CHR bank
   $4100: [.... .PCC] - Select 32 KiB PRG bank and 8 KiB CHR bank
 
<hr>
Another physical release instead wired a [[iNES Mapper 206|Namco 108]] clone in an inscrutably complex way:
Another physical release instead wired a [[iNES Mapper 206|Namco 108]] clone in an inscrutably complex way:



Revision as of 19:08, 18 December 2017

GoodNES allocated iNES Mapper 133 for the Sachen unlicensed game "Jovial Race". It's almost identical to NINA-06.

Санчез, however, allocated Jovial Race to iNES Mapper 150. Either way, its UNIF MAPR is UNL-SA-72008.

 Mask: $6100
 Bus conflicts for the mirror at $C100-$DFFF (don't do that)
 $4100: [.... .PCC] - Select 32 KiB PRG bank and 8 KiB CHR bank

Another physical release instead wired a Namco 108 clone in an inscrutably complex way:

 Mask: $E001
 $8000: [..B. .B.B] - Select register
 $8001: [...X XPCC] - Write value to register
            | ||||
            | ||++--- select 8 KiB CHR bank
            | |+----- select 32 KiB PRG bank
            +-+------ analog feedback path

Four of the registers produce an analog feedback path through the 108's CHR bankswitching registers:

XX bits behavior
$00 if this register was selected, switch to using contents of register $04
$08 if this register was selected, switch to using contents of register $24
$10 if this register was selected, switch to using contents of register $01
$18 if this register was selected, switch to using contents of register $21

If this feedback path doesn't settle on one specific register, then the selected banks will rapidly switch between all the registers specified by the feedback path, and the 108 clone will get hot.

See also: