INES Mapper 091: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
NewRisingSun (talk | contribs) (Add submapper (http://forums.nesdev.com/viewtopic.php?f=9&t=15240&p=231790#p231790)) |
m (defaultsort) |
||
Line 1: | Line 1: | ||
[[Category:iNES Mappers | {{DEFAULTSORT:091}}[[Category:iNES Mappers]][[Category:Mappers with fixed-timing scanline IRQs]] | ||
iNES Mapper 091 was used by the original release of ''Super Fighter III'' from an unknown publisher, but is more commonly known by a clone board from J.Y. Company. | iNES Mapper 091 was used by the original release of ''Super Fighter III'' from an unknown publisher, but is more commonly known by a clone board from J.Y. Company. | ||
{| class="wikitable" | {| class="wikitable" |
Latest revision as of 19:33, 24 April 2019
iNES Mapper 091 was used by the original release of Super Fighter III from an unknown publisher, but is more commonly known by a clone board from J.Y. Company.
INES Mapper 091 submapper table | ||
---|---|---|
Submapper # | Board | Games |
0 | JY830623C | Street Fighter 3, Mortal Kombat II, Dragon Ball Z 2, Mario & Sonic 2 |
0 | YY840238C | 1995 Super HIK 4-in-1 (JY-016), 1995 Super HiK 4-in-1 (JY-017) |
1 | EJ-006-1 | Super Fighter III |
Submapper 0 has a PA12-based IRQ counter and hard-wired mirroring; submapper 1 an M2-based IRQ counter and selectable mirroring.
Banks
- CPU $8000-$9FFF: 8 KiB switchable PRG-ROM bank
- CPU $A000-$BFFF: 8 KiB switchable PRG-ROM bank
- CPU $C000-$FFFF: 16 KiB PRG-ROM bank, hard-wired to last bank
- PPU $0000-$07FF: 2 KiB switchable CHR-ROM bank
- PPU $0800-$0FFF: 2 KiB switchable CHR-ROM bank
- PPU $1000-$17FF: 2 KiB switchable CHR-ROM bank
- PPU $1800-$1FFF: 2 KiB switchable CHR-ROM bank
Registers
CHR-ROM Bank Select ($6000-$6003, write)
Mask: $F003/$F007 (submapper 0/1)
- $6000: Select 2 KiB CHR-ROM bank at PPU $0000-$07FF
- $6001: Select 2 KiB CHR-ROM bank at PPU $0800-$0FFF
- $6002: Select 2 KiB CHR-ROM bank at PPU $1000-$17FF
- $6003: Select 2 KiB CHR-ROM bank at PPU $1800-$1FFF
Nametable Mirroring Select ($6004-$6005, write, submapper 1 only)
Mask: $F007
- $6004: Select horizontal mirroring, value ignored
- $6005: Select vertical mirroring, value ignored
IRQ Counter Register ($6006-$6007, write, submapper 1 only)
Mask: $F007
- $6006: Set IRQ Counter LSB
- $6007: Set IRQ Counter MSB
PRG-ROM Bank Select ($7000-$7001, write)
Mask: $F003/$F007 (submapper 0/1)
- $7000: Select 8 KiB PRG-ROM bank at CPU $8000-$9FFF
- $7001: Select 8 KiB PRG-ROM bank at CPU $A000-$BFFF
IRQ Stop/Acknowledge ($7006, write)
Mask: $F003 (submapper 0)/$F007 (submapper 1)
Value is ignored..
IRQ Start/Reset ($7007, write)
Mask: $F003/$F007 (submapper 0/1)
Value is ignored.
Outer Bank register ($8000-$9FFF, write, submapper 0 only)
Mask: unknown
A~FEDC BA98 7654 3210 ------------------- .... .... .... .PPC ||+- Select outer 512 KiB CHR-ROM bank (CHR A19) ++-- Select outer 128 KiB PRG-ROM bank (PRG A17-A18)
Notes
- Submapper 0: the IRQ counter is a binary counter clocked by PPU A12, and simply counts a fixed number of 64 unfiltered rises of PPU A12.
- Submapper 1: the IRQ counter is a binary counter clocked by the M2 signal with a factor of 5/4, meaning counting down by five every fourth M2 cycle.
- Submapper 1's Super Fighter III runs a hardware test when resetting with Select+Start+B pressed. The test exists in J.Y. Company's hacked versions as well, but was not adjusted for the simpler hardware and thus will fail some tests.
- The commonly available ROM image of Super Fighter III is a mapper hack for INES Mapper 197.