FxROM: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (→Battery backup: problem with the "section edit" feature is that you miss related changes you need to make. add an "M") |
m (→Battery backup: typo) |
||
| Line 26: | Line 26: | ||
* PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present. | * PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present. | ||
On the FKROM board, battery backup appears to be compulsary unless there is a hidden solder | On the FKROM board, battery backup appears to be compulsary unless there is a hidden solder pad below the MM1026 chip. | ||
== Hardware == | == Hardware == | ||
Revision as of 16:56, 17 April 2014
The generic designation FxROM refers to cartridge boards made by Nintendo that use the Nintendo MMC4 mapper.
The following FxROM boards are known to exist:
| Board | PRG ROM | PRG RAM | CHR |
|---|---|---|---|
| FJROM | 128, 256 KB | 8 KB | 16, 32, 64 KB ROM |
| FKROM | 128, 256 KB | 8 KB | 128 KB ROM |
Overview
- PRG ROM size: up to 256 KB
- PRG ROM bank size: 16 KB
- PRG RAM: 8 KB plus optional battery
- CHR capacity: up to 128 KB ROM
- CHR bank size: 4 KB
- Nametable mirroring: Controlled by mapper
- Subject to bus conflicts: No
Solder Pad config
Battery backup
- PRG RAM with data retention : 'SL' disconnected, D1, D2, R1, R2, R3 present.
- PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present.
On the FKROM board, battery backup appears to be compulsary unless there is a hidden solder pad below the MM1026 chip.
Hardware
The FKROM board uses a Mitsumi MM1026 chip dedicated to safe battery backup. It's the only Nintendo board to use a specific chip dedicated to safe battery backup.
