Sunsoft 2 pinout: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (linky linky. fix tense)
(rejigger, add cat:pinouts, add 74-series logic equivalent)
Line 1: Line 1:
[[Category:Pinouts]]
Sunsoft-2: 24 pin shrink PDIP (mappers [[iNES Mapper 089|89]] and [[iNES Mapper 093|93]])
Sunsoft-2: 24 pin shrink PDIP (mappers [[iNES Mapper 089|89]] and [[iNES Mapper 093|93]])
 
                .---\/---.       
                .---\/---.       
  (r) PRG A15 <- | 01 24 | -- +5V
(r) PRG A15 <- |01   24| -- +5V
  (r) PRG A14 <- | 02 23 | <- PPU A14 (f)
(r) PRG A14 <- |02   23| <- PPU A14 (n)
  (r) PRG A16 <- | 03 22 | -> OR Y (CHR nCS) (r)
(r) PRG A16 <- |03   22| -> CHR nCS (r) *1
   (fr) CPU D7 -> | 04 21 | -> CHR A16 (r)
   (s) CPU D7 -> |04   21| -> CHR A16 (r)
   (fr) CPU D6 -> | 05 20 | <- OR B (PPU nRD) (f, r?)
   (s) CPU D6 -> |05   20| <- PPU nRD (s/n)
   (fr) CPU D5 -> | 06 19 | -> CHR A13 (r)
   (s) CPU D5 -> |06   19| -> CHR A13 (r) *2
   (fr) CPU D4 -> | 07 18 | -> CHR A14 (r)
   (s) CPU D4 -> |07   18| -> CHR A14 (r)
   (fr) CPU D3 -> | 08 17 | -> CHR A15 (r)
   (s) CPU D3 -> |08   17| -> CHR A15 (r)
   (fr) CPU D2 -> | 09 16 | <- /ROMSEL (fr)
   (s) CPU D2 -> |09   16| <- /ROMSEL (s)
   (fr) CPU D1 -> | 10 15 | <- CPU RnW (f)
   (s) CPU D1 -> |10   15| <- CPU RnW (n)
   (fr) CPU D0 -> | 11 14 | <- OR A (PPU A13) (f)
   (s) CPU D0 -> |11   14| <- PPU A13 (n)
          GND -- | 12 13 | -> CIRAM A10 (f)
        GND -- |12   13| -> CIRAM A10 (n)
                `--------'
                `--------'
   
   
  *1 CHR nCS is the logical OR of CHR nRD and CHR A13, allowing them to use a 28-pin 128kB ROM
  22 CHR nCS is the logical OR of PPU nRD and PPU A13, allowing them to use a 28-pin 128kB ROM
  *2 CHR A13 is connected to CHR RAM's positive chip enable, so games that use CHR RAM must write 1 to it
  19 CHR A13 is connected to CHR RAM's positive chip enable, so games that use CHR RAM must write 1 to it


The Sunsoft-2 mapper was found on the [[iNES Mapper 089|Sunsoft-3]] and [[iNES Mapper 093|Sunsoft-3R]] boards,
The Sunsoft-2 mapper was found on the [[iNES Mapper 089|Sunsoft-3]] and [[iNES Mapper 093|Sunsoft-3R]] boards,
Line 29: Line 29:
* J5, J6  -  CHR's nOE/A16 input: J5=SS2 A16, J6=PPU nRD
* J5, J6  -  CHR's nOE/A16 input: J5=SS2 A16, J6=PPU nRD
* J7, J8, J9  -  mirroring: J7=horizontal, J8=vertical, J9=mapper-controlled one-screen
* J7, J8, J9  -  mirroring: J7=horizontal, J8=vertical, J9=mapper-controlled one-screen
This IC could replaced with a 74377 and a 7432:
                        74-377
                  .------\/------.     
  (fr) /ROMSEL -> | /E 01  24 +5 | -- +5V
    (r) CHR A13 <- | Q0 02  23 Q7 | -> CHR A16 (r)
    (fr) CPU D0 -> | D0 03  22 D7 | <- CPU D7 (fr)
    (fr) CPU D1 -> | D1 04  21 D6 | <- CPU D6 (fr)
    (r) CHR A14 <- | Q1 05  20 Q6 | -> Q6
    (r) CHR A15 <- | Q2 06  19 Q5 | -> Q5
    (fr) CPU D2 -> | D2 07  18 D5 | <- CPU D5 (fr)
    (fr) CPU D3 -> | D3 08  17 D4 | <- CPU D4 (fr)
  (f) CIRAM A10 <- | Q3 09  16 Q4 | -> Q4
            GND -- | gn 10  15 CP | <- CPU RnW (f)
                  `--------------'
 
                        74--32
                  .------\/------.     
            Q4 -> | A1 01  24 +5 | -- +5V
    (f) CPU A14 -> | B1 02  23 A4 | <- PPU nRD (f)
    (r) PRG A14 <- | Y1 03  22 B4 | <- PPU A13 (f)
            Q5 -> | A2 04  21 Y4 | -> CHR nCS (r)
    (f) CPU A14 -> | B2 05  20 A3 | <- Q6
    (r) PRG A15 <- | Y2 06  19 B3 | <- CPU A14 (f)
            GND -- | gn 07  18 Y3 | -> PRG A16 (r)
                  `--------------'

Revision as of 04:02, 31 January 2013

Sunsoft-2: 24 pin shrink PDIP (mappers 89 and 93) 

                .---\/---.       
 (r) PRG A15 <- | 01  24 | -- +5V
 (r) PRG A14 <- | 02  23 | <- PPU A14 (f)
 (r) PRG A16 <- | 03  22 | -> OR Y (CHR nCS) (r)
 (fr) CPU D7 -> | 04  21 | -> CHR A16 (r)
 (fr) CPU D6 -> | 05  20 | <- OR B (PPU nRD) (f, r?)
 (fr) CPU D5 -> | 06  19 | -> CHR A13 (r)
 (fr) CPU D4 -> | 07  18 | -> CHR A14 (r)
 (fr) CPU D3 -> | 08  17 | -> CHR A15 (r)
 (fr) CPU D2 -> | 09  16 | <- /ROMSEL (fr)
 (fr) CPU D1 -> | 10  15 | <- CPU RnW (f)
 (fr) CPU D0 -> | 11  14 | <- OR A (PPU A13) (f)
         GND -- | 12  13 | -> CIRAM A10 (f)
                `--------'

22 CHR nCS is the logical OR of PPU nRD and PPU A13, allowing them to use a 28-pin 128kB ROM
19 CHR A13 is connected to CHR RAM's positive chip enable, so games that use CHR RAM must write 1 to it

The Sunsoft-2 mapper was found on the Sunsoft-3 and Sunsoft-3R boards, which are identical besides the default setting for the 9 configuration jumpers.

The Sunsoft-3R board was by default jumpered for 8kB of CHR RAM; the Sunsoft-3 board for 128kB of CHR ROM.

  • J1, J2 - CHR's nWR/A14 input: J1=PPU nWR, J2=SS2 A14
  • J3, J4 - SS2's PPU nRD input: J3=connected to PPU's nRD, J4= tied to ground
  • J5, J6 - CHR's nOE/A16 input: J5=SS2 A16, J6=PPU nRD
  • J7, J8, J9 - mirroring: J7=horizontal, J8=vertical, J9=mapper-controlled one-screen

This IC could replaced with a 74377 and a 7432: 

                       74-377
                  .------\/------.       
  (fr) /ROMSEL -> | /E 01  24 +5 | -- +5V
   (r) CHR A13 <- | Q0 02  23 Q7 | -> CHR A16 (r)
   (fr) CPU D0 -> | D0 03  22 D7 | <- CPU D7 (fr)
   (fr) CPU D1 -> | D1 04  21 D6 | <- CPU D6 (fr)
   (r) CHR A14 <- | Q1 05  20 Q6 | -> Q6
   (r) CHR A15 <- | Q2 06  19 Q5 | -> Q5
   (fr) CPU D2 -> | D2 07  18 D5 | <- CPU D5 (fr)
   (fr) CPU D3 -> | D3 08  17 D4 | <- CPU D4 (fr)
 (f) CIRAM A10 <- | Q3 09  16 Q4 | -> Q4
           GND -- | gn 10  15 CP | <- CPU RnW (f)
                  `--------------'
 
                       74--32
                  .------\/------.       
            Q4 -> | A1 01  24 +5 | -- +5V
   (f) CPU A14 -> | B1 02  23 A4 | <- PPU nRD (f)
   (r) PRG A14 <- | Y1 03  22 B4 | <- PPU A13 (f)
            Q5 -> | A2 04  21 Y4 | -> CHR nCS (r)
   (f) CPU A14 -> | B2 05  20 A3 | <- Q6
   (r) PRG A15 <- | Y2 06  19 B3 | <- CPU A14 (f)
           GND -- | gn 07  18 Y3 | -> PRG A16 (r)
                  `--------------'
Retrieved from "https://www.nesdev.org/w/index.php?title=Sunsoft_2_pinout&oldid=11338"