NES 2.0 Mapper 364: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
NewRisingSun (talk | contribs) (Created page with "NES 2.0 Mapper 364 is used for an early MMC3-based multicart PCB (JY830832C) from J.Y. Company, preceding the J.Y. Company ASIC: * ''1994 Super HiK 3-in-1 (JY-007)'' ==Ou...") |
m (defaultsort) |
||
| Line 1: | Line 1: | ||
NES 2.0 Mapper 364 is used for an early MMC3-based multicart PCB (JY830832C) from J.Y. Company, preceding the [[J.Y. Company ASIC]]: | {{DEFAULTSORT:364}}NES 2.0 Mapper 364 is used for an early MMC3-based multicart PCB (JY830832C) from J.Y. Company, preceding the [[J.Y. Company ASIC]]: | ||
* ''1994 Super HiK 3-in-1 (JY-007)'' | * ''1994 Super HiK 3-in-1 (JY-007)'' | ||
Revision as of 07:01, 26 May 2020
NES 2.0 Mapper 364 is used for an early MMC3-based multicart PCB (JY830832C) from J.Y. Company, preceding the J.Y. Company ASIC:
- 1994 Super HiK 3-in-1 (JY-007)
Outer Bank Register ($7000)
Mask: unknown D~7654 3210 --------- .PSC .... ||+------ CHR A18 |+------- PRG/CHR A17 mode | 0: Preserve MMC3's PRG/CHR A17 | 1: Force PRG/CHR A17 to 0 +-------- PRG A18
This register is accessible regardless of whether WRAM is enabled in the MMC3 clone's A001 register. It may be possible that there is another bit, unused on the only discovered cartridge using this mapper, that selects the bit value which PRG/CHR A17 is forced to when S=1.
MMC3-compatible registers
Mask: $E001 See MMC3.
See also
NES 2.0 Mapper 361 describes a simpler variant with a fixed outer bank size.
