INES Mapper 038: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (consistent naming...) |
m (minor format, add cats, add link to dischdocs) |
||
| Line 1: | Line 1: | ||
[[Category:GNROM-like mappers]][[Category:iNES Mappers]] | [[Category:GNROM-like mappers]][[Category:iNES Mappers]][[Category:Discrete logic mappers]][[Category:in NesCartDB]] | ||
Mapper | [[iNES Mapper 038]] represents the board used for Crime Busters. It is another mapper very similiar to [[GxROM|GNROM]] ([[iNES Mapper 066|66]]) except the bits and writeable port moved around. | ||
In Disch's style: | In [[iNES Mapper DischDocs|Disch's style]]: | ||
$7000-$7FFF: [.... CCPP] | $7000-$7FFF: [.... CCPP] | ||
P = Selects 32kB PRG @ $8000 | P = Selects 32kB PRG @ $8000 | ||
Revision as of 08:23, 26 July 2012
iNES Mapper 038 represents the board used for Crime Busters. It is another mapper very similiar to GNROM (66) except the bits and writeable port moved around.
In Disch's style:
$7000-$7FFF: [.... CCPP] P = Selects 32kB PRG @ $8000 C = Selects 8kB CHR @ $0000
Writes to $F000-$FFFF are very likely to also trigger a bankswitch, but well behaved code has no reason to. The 74138 used by this board uses /PRGSEL and R/W on its enable inputs, but /PRGSEL is 1 while M2 is low, not just while M2 and A15 are high. As a result, before M2 is high, if the 2A03's A14, A13, and A12 lines are 1 and R/W is 0, the 74161's /LOAD line will still load from the data bus.
Emulator oversize support:
FCEUX (2.1.5):
$7000-$7FFF: [CCCC CCPP]
Nestopia (1.4.0h):
$6000-$7FFF: [CCCC CC..]
[PPPP PPPP]
