NES 2.0 Mapper 446: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
NewRisingSun (talk | contribs) (Correct 5000 bits) |
NewRisingSun (talk | contribs) ("NROM" is actually "BNROM" that becomes "NROM" through the application of an appropriate inner bank mask. Add H3001.) |
||
Line 19: | Line 19: | ||
| 1 || 01 || [[TKROM]] | | 1 || 01 || [[TKROM]] | ||
|- | |- | ||
| 1 || 02 || [[ | | 1 || 02 || [[BNROM]] | ||
|- | |- | ||
| 1 || 03 || [[CNROM]] | | 1 || 03 || [[CNROM]] | ||
Line 57: | Line 57: | ||
| 2 || 01 || [[TKROM]] | | 2 || 01 || [[TKROM]] | ||
|- | |- | ||
| 2 || 02 || [[ | | 2 || 02 || [[BNROM]] | ||
|- | |- | ||
| 2 || 03 || [[CNROM]] | | 2 || 03 || [[CNROM]] | ||
Line 92: | Line 92: | ||
|- | |- | ||
| 2 || 1A || [[VRC1]] | | 2 || 1A || [[VRC1]] | ||
|- | |||
| 3 || 01 || [[H3001]] | |||
|- | |- | ||
|} | |} |
Revision as of 09:39, 6 July 2024
NES 2.0 Mapper 446 denotes Mindkids' SMD172B_FPGA circuit board. It is used for some large multicarts from Pixel Games as well as for homebrew games such as:
- Jay and Silent Bob Mall Brawl
- Blazing Rangers/炎のRangerman
Supervisor Registers
Mapper Selection ($5000, write)
D~[L..M MMMM] | +-++++-- Mapper for the FPGA to emulate +---------- 1=Lock supervisor registers until reset
The set of mappers that the FPGA can emulate differs across cartridges and is selected by the NES 2.0 Submapper.
NES 2.0 Submapper | $5000.0-4 | Mapper |
---|---|---|
0 | 01 | SKROM |
1 | 00 | UNROM |
1 | 01 | TKROM |
1 | 02 | BNROM |
1 | 03 | CNROM |
1 | 04 | ANROM |
1 | 05 | SKROM |
1 | 06 | SNROM |
1 | 07 | SUROM |
1 | 08 | GNROM |
1 | 09 | PNROM |
1 | 0A | HKROM |
1 | 0B | INES Mapper 152 |
1 | 0E | TKSROM |
1 | 0F | INES Mapper 189 |
1 | 10 | INES Mapper 026 |
1 | 12 | INES Mapper 022 |
1 | 15 | INES Mapper 025 |
1 | 18 | INES Mapper 023 |
1 | 1A | VRC1 |
2 | 00 | UNROM |
2 | 01 | TKROM |
2 | 02 | BNROM |
2 | 03 | CNROM |
2 | 04 | ANROM |
2 | 05 | SKROM |
2 | 06 | SNROM |
2 | 07 | SUROM |
2 | 08 | GNROM |
2 | 09 | TLROM |
2 | 0A | HKROM |
2 | 0B | INES Mapper 152 |
2 | 0D | TKROM |
2 | 0E | TKSROM |
2 | 0F | INES Mapper 189 |
2 | 10 | INES Mapper 026 |
2 | 12 | INES Mapper 022 |
2 | 15 | INES Mapper 025 |
2 | 18 | INES Mapper 023 |
2 | 1A | VRC1 |
3 | 01 | H3001 |
Outer 8 KiB PRG-ROM Bank LSB ($5001, write)
D~[BBBB BBBB] ++++-++++- PRG A20..A13
Outer 8 KiB PRG-ROM Bank MSB ($5002, write)
D~[BBBB BBBB] ++++-++++- PRG A28..A21
Inner 8 KiB PRG-ROM Bank Mask ($5003, write)
D~[MMMM MMMM] ++++-++++- PRG A20..A13 mask
The register has an inverted meaning in Submapper 2 vs. Submappers 0-1. In Submappers 0-1, an "1" bit means that the Outer Bank bit is used. In Submapper 2, an "1" bit means that the Inner Bank bit is used.
Flags ($5004, write)
D~[..CC ...M] || +- Mirroring (V=1) ++------ Inner CHR-RAM address mask 0x: 256 KiB 10: 128 KiB 11: 32 KiB
The mirroring bit has no effect when selecting an FPGA mapper with software-selectable mirroring.
CHR RAM protect ($5005, write)
D~[.... .P..] +- 1: Write-protect CHR-RAM
Outer 8 KiB CHR-RAM Bank ($5006, write)
D~[...B BBBB] +-++++- CHR A17..A13