74377: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(reference) |
(cat) |
||
Line 1: | Line 1: | ||
The 74377 chip is used as a latch in mappers like [[Color Dreams]] and stores eight bits of data. | The '''74377'' chip (common variants 74LS377, 74HC3770 is used as a latch in mappers like [[Color Dreams]] and stores eight bits of data. | ||
<pre> | <pre> | ||
74HC377 | 74HC377 | ||
Line 25: | Line 25: | ||
== References == | == References == | ||
*Philips Semiconductors. [http://www.alldatasheet.com/datasheet-pdf/pdf/15594/PHILIPS/74HC377.html 74HC377: Octal D-type flip-flop with data enable; positive-edge trigger] | *Philips Semiconductors. [http://www.alldatasheet.com/datasheet-pdf/pdf/15594/PHILIPS/74HC377.html 74HC377: Octal D-type flip-flop with data enable; positive-edge trigger] | ||
[[Category:7400 series|377]] |
Revision as of 20:03, 5 April 2011
The '74377 chip (common variants 74LS377, 74HC3770 is used as a latch in mappers like Color Dreams and stores eight bits of data.
74HC377 Octal D flip-flop ,---_---. /WE -| 1 20|- Vcc Q0 -| 2 19|- Q7 D0 -| 3 18|- D7 D1 -| 4 17|- D6 Q1 -| 5 16|- Q6 Q2 -| 6 15|- Q5 D2 -| 7 14|- D5 D3 -| 8 13|- D4 Q3 -| 9 12|- Q4 GND -|10 11|- CLK `-------'
- Vcc: Connect to +5V
- GND:
- CLK: Load clock
- /WE: Write enable
- D0-7: Inputs, connected to CPU D0-D7
- Q0-7: Outputs, connected to PRG and CHR ROM address lines
D0-7 are copied to Q0-7 when CLK rises (0 to 1) while /WE is low.
References
- Philips Semiconductors. 74HC377: Octal D-type flip-flop with data enable; positive-edge trigger