User:Zzo38/Mapper B: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Created page with "This mapper is defined by tepples as "Mapper 670". CPU address space: * $8000-$9FFF: Switchable bank 0 * $A000-$BFFF: Switchable bank 1 * $C000-$DFFF: Switchable bank 2 * $E0...")
 
(Original forum post describing planes)
Line 1: Line 1:
This mapper is defined by tepples as "Mapper 670".
This mapper was originally described by tepples as "Mapper 670" after its use of a 74HC670 prior to the division of the [[NES 2.0#Byte 8 (Mapper variant)|NES 2.0 expanded mapper space]] into [[Mapper#Supplementary Multilingual Plane|planes]].


CPU address space:
CPU address space:
Line 11: Line 11:


Sometimes there may be PRG RAM at $6000-$7FFF. Usually there is 8K CHR RAM, although there might be 8K CHR ROM.
Sometimes there may be PRG RAM at $6000-$7FFF. Usually there is 8K CHR RAM, although there might be 8K CHR ROM.
== References ==
* [http://forums.nesdev.org/viewtopic.php?t=2669 Original forum post] (November 2006)

Revision as of 14:26, 29 June 2013

This mapper was originally described by tepples as "Mapper 670" after its use of a 74HC670 prior to the division of the NES 2.0 expanded mapper space into planes.

CPU address space:

  • $8000-$9FFF: Switchable bank 0
  • $A000-$BFFF: Switchable bank 1
  • $C000-$DFFF: Switchable bank 2
  • $E000-$EFFF: Switchable bank 3
  • $F000-$FFFF: Fixed to last bank

Banks are switched by writing the 8K bank number into the low four bits of registers in the same address space where the banks are at. There is no bus conflicts.

Sometimes there may be PRG RAM at $6000-$7FFF. Usually there is 8K CHR RAM, although there might be 8K CHR ROM.

References