Talk:INES: Difference between revisions
(→4-screen mirroring: new section) |
|||
| Line 17: | Line 17: | ||
I'm fairly confident most emulators will happily gives you 4-screen mirroring when asked for it, even if they are in mappers where such a possibility wasn't used. I remember at some point considering using 4-screen mirroring with CNROM and it worked well. | I'm fairly confident most emulators will happily gives you 4-screen mirroring when asked for it, even if they are in mappers where such a possibility wasn't used. I remember at some point considering using 4-screen mirroring with CNROM and it worked well. | ||
[[User:Bregalad|Bregalad]] ([[User talk:Bregalad|talk]]) 01:55, 13 January 2019 (MST) | [[User:Bregalad|Bregalad]] ([[User talk:Bregalad|talk]]) 01:55, 13 January 2019 (MST) | ||
: In my limited experience, most emulators will let you start with 4-screen layout, but if the mapper has a mirroring control register, using it will irrevocably remove the extra nametables. For example, this is what goes wrong when trying to run Vs. Goonies on FCEUX as mapper 75 instead of mapper 151. —[[User:Lidnariq|Lidnariq]] ([[User talk:Lidnariq|talk]]) 02:13, 13 January 2019 (MST) | |||
Revision as of 09:13, 13 January 2019
How does a PlayChoice hint screen work? --Zzo38 19:08, 21 September 2012 (MDT)
Last 4
Should this be "if the last 5 bytes are not all zero"? "A general rule of thumb: if the last 4 bytes are not all zero, and the header is not marked for NES 2.0 format, an emulator should either mask off the upper 4 bits of the mapper number or simply refuse to load the ROM." -Ulfalizer (talk) 03:45, 14 July 2013 (MDT)
- When I wrote 4 as the rule of thumb, I didn't know how many not-widely-adopted extensions to original iNES were floating around, and I guessed that one or more might have used byte 11 for something, but all of the ROMs I saw with DiskDude and similar tags had at least something in the last four bytes of the header. --Tepples (talk) 07:48, 14 July 2013 (MDT)
- Nestopia checks the last 6, and clears/ignores the last 9. (It also actually does pay attention to bytes 8 and 9)—Lidnariq (talk) 11:21, 14 July 2013 (MDT)
- If the header contains "DiskDude!" or one of those other things (I forget now, but I knew at one time and figured this out), then bit2 of flags 7 will be set; otherwise bit2 and bit3 should both be cleared. This may be another way. --Zzo38 (talk) 19:51, 20 August 2013 (MDT)
4-screen mirroring
Reference needed I'm afraid.
"Theoretically bit 3 could be used for most mappers that had hard-wired mirroring to transparently provide 4KB of VRAM for 4-screen instead. However, many emulators will ignore this bit except for mappers with prior 4-screen variations."
I'm fairly confident most emulators will happily gives you 4-screen mirroring when asked for it, even if they are in mappers where such a possibility wasn't used. I remember at some point considering using 4-screen mirroring with CNROM and it worked well. Bregalad (talk) 01:55, 13 January 2019 (MST)
- In my limited experience, most emulators will let you start with 4-screen layout, but if the mapper has a mirroring control register, using it will irrevocably remove the extra nametables. For example, this is what goes wrong when trying to run Vs. Goonies on FCEUX as mapper 75 instead of mapper 151. —Lidnariq (talk) 02:13, 13 January 2019 (MST)
