ΜPD7755C/µPD7756C pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(Not thrilled by the capital Μ in the URL but we can move the page later) |
mNo edit summary |
||
| Line 14: | Line 14: | ||
'-----' | '-----' | ||
The amount of current flowing into Iref specifies the amount of current flowing into the SOUND output when the DAC is set to | The amount of current flowing into Iref specifies the amount of current flowing into the SOUND output when the DAC is set to 16 (1/32nd full scale). This is usually configured with an external resistor. | ||
X1 and X2 should be hooked up to a 640kHz ceramic resonator. | X1 and X2 should be hooked up to a 640kHz ceramic resonator. | ||
Latest revision as of 20:31, 10 February 2020
NEC µPD7755, µPD7756: 18-pin 0.3" DIP (used with mappers 18, 72, 86, and 92)
.--V--.
I4 -> |01 18| <- I3
I5 -> |02 17| <- I2
I6 -> |03 16| <- I1
I7 -> |04 15| <- I0
Iref -> |05 14| <- /START
SOUND <- |06 13| <- /CS
/BUSY <- |07 12| <- X1
/RST -> |08 11| -> X2
Gnd -- |09 10| -- Vdd
'-----'
The amount of current flowing into Iref specifies the amount of current flowing into the SOUND output when the DAC is set to 16 (1/32nd full scale). This is usually configured with an external resistor.
X1 and X2 should be hooked up to a 640kHz ceramic resonator.
