MOD RF: Difference between revisions

Latest revision as of 00:44, 15 October 2014

This is a description of the daughterboard attached to the main NES logic board with a 5-pin soldered header.

Note: Surface-mount and uninstalled components are not listed

@@ Line 4: / Line 4: @@
 ===Alps===
 ====Parts List====
+Note:  Surface-mount and uninstalled components are not listed
+*C19-20:  R 472M 4700pF 2KV ceramic disc capacitors
+*C21:  2200µF 25V electrolytic capacitor
+*C23:  100µF 25V electrolytic capacitor
+*C25:  100µF 10V electrolytic capacitor
+*C29,C35:  1µF 50V electrolytic capacitors
+*C36:  10µF 16V electrolytic capacitor
+*D1-4:  "N 8" rectifier diodes
+*L1:  2.2µH 20% inductor
+*L3:  0.48µH hand-wound inductor
+*L4:  0.39µH hand-wound inductor
+*L6:  0.32µH hand-wound inductor
+*L8:  220nH inductor
+*L9:  68µH 20% inductor
+*L?:  0.1µH hand-wound inductor
+*Q1,Q4-5:  2SC1740 NPN transistor
+*Q2:  2SC461 NPN transistor (Must use VHF-capable speeds if substituting)
+*R7:  15K Ohms 5% resistor
+*R19:  1K Ohms 5% resistor
+*R20:  1.8K Ohms 5% resistor
+*R22:  10K Ohms 5% resistor
+*R24:  105 Ohms 5% resistor
+*R25:  82 Ohms 5% resistor
 ====Schematics====
-[[File:GLEEOfl_full.jpg|thumb]]
+[[Image:GLEEOfl_full.jpg|200px]]
-Components as placed on non-solder side of board.
+Components as placed on non-solder (through-hole component) side of board.
 ===Mitsumi===
 ====Parts List====
 ====Schematics====