INES Mapper 113: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (add emulator details) |
NewRisingSun (talk | contribs) (Add PCB name) |
||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[Category:iNES Mappers]] | {{DEFAULTSORT:113}}[[Category:iNES Mappers]][[Category:GNROM-like mappers]][[Category:Mappers using $4020-$5FFF]][[Category:Multicart mappers]] | ||
{{Infobox iNES mapper | |||
|name=Mapper 113 | |||
|mapper=113 | |||
|prgmax=256K | |||
|prgpage=32K | |||
|chrmax=128K | |||
|chrpage=8k | |||
|busconflicts=No | |||
|mirroring=H or V, controlled by mapper | |||
}} | |||
[[iNES Mapper 113]] denotes the HES '''NTD-8''' circuit board, used to create multicarts made for a bunch of [[NINA-003-006|NINA-03/06]] games. | |||
Example Games: | |||
* ''HES 6-in-1'' | |||
* ''Mind Blower Pak'' | |||
* ''Total Funpak'' | |||
== Banks == | |||
* CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB) | |||
* PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB) | |||
== Registers == | |||
=== Control Register === | |||
This register is located at addresses: | |||
F bit 0 | |||
---- ---- ---- ---- | |||
010x xxx1 xxxx xxxx | |||
That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx. | |||
7 bit 0 | |||
---- ---- | |||
MCPP PCCC | |||
|||| |||| | |||
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF | |||
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF | |||
+---------- Mirroring control (0 = Horizontal, 1 = Vertical) | |||
Note the high bit of the CHR select is shifted away from the others. | |||
== Variants == | |||
This mapper extends the [[NINA-003-006|NINA-03/06]] with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add [[mirroring]] control, 1 extra bit of CHR select, and 2 extra bits of PRG select. | |||
== References == | |||
* [http://www.romhacking.net/documents/362/ NES mapper list by Disch] | |||
Latest revision as of 11:51, 3 March 2023
Mapper 113
| Company | unknown |
| Boards | unknown |
| PRG ROM capacity | 256K |
| PRG ROM window | 32K |
| PRG RAM capacity | None |
| CHR capacity | 128K |
| CHR window | 8k |
| Nametable mirroring | H or V, controlled by mapper |
| Bus conflicts | No |
| IRQ | No |
| Audio | No |
| iNES mappers | 113 |
iNES Mapper 113 denotes the HES NTD-8 circuit board, used to create multicarts made for a bunch of NINA-03/06 games.
Example Games:
- HES 6-in-1
- Mind Blower Pak
- Total Funpak
Banks
- CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB)
- PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB)
Registers
Control Register
This register is located at addresses:
F bit 0 ---- ---- ---- ---- 010x xxx1 xxxx xxxx
That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.
7 bit 0 ---- ---- MCPP PCCC |||| |||| |+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF | ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF +---------- Mirroring control (0 = Horizontal, 1 = Vertical)
Note the high bit of the CHR select is shifted away from the others.
Variants
This mapper extends the NINA-03/06 with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add mirroring control, 1 extra bit of CHR select, and 2 extra bits of PRG select.
