INES Mapper 113: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (oops, nina-1 is not the same)
(Add PCB name)
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers]]
{{DEFAULTSORT:113}}[[Category:iNES Mappers]][[Category:GNROM-like mappers]][[Category:Mappers using $4020-$5FFF]][[Category:Multicart mappers]]
{{Infobox iNES mapper
|name=Mapper 113
|mapper=113
|prgmax=256K
|prgpage=32K
|chrmax=128K
|chrpage=8k
|busconflicts=No
|mirroring=H or V, controlled by mapper
}}
[[iNES Mapper 113]] denotes the HES '''NTD-8''' circuit board, used to create multicarts made for a bunch of [[NINA-003-006|NINA-03/06]] games.


[[iNES Mapper 113]] is used to designate the [[NINA-003-006|NINA-3/6]] board.
Example Games:
  Here are Disch's original notes:
* ''HES 6-in-1''
  ========================
* ''Mind Blower Pak''
  =  Mapper 113          =
* ''Total Funpak''
  ========================
 
 
== Banks ==
  Example Games:
* CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB)
  --------------------------
* PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB)
  Rad Racket - Deluxe Tennis II
 
  Papillion
== Registers ==
 
=== Control Register ===
 
This register is located at addresses:
 
F        bit      0
  Registers:
---- ---- ---- ----
  ---------------------------
010x xxx1 xxxx xxxx
 
 
  Range,Mask:  $4100-5FFF, $4100
That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.
 
 
    be sure to make note of the mask -- $4200 does not map to the register, but $4300 does.
7  bit  0
 
---- ----
 
MCPP PCCC
    $4100:  [MCPP PCCC]
|||| ||||
      C = CHR Reg (8k @ $0000)
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF
      P = PRG Reg (32k @ $8000)
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF
      M = Mirroring:
+---------- Mirroring control (0 = Horizontal, 1 = Vertical)
          0 = Horz
 
          1 = Vert
Note the high bit of the CHR select is shifted away from the others.
 
 
  Note the high bit of the CHR Reg.
== Variants ==
 
This mapper extends the [[NINA-003-006|NINA-03/06]] with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add [[mirroring]] control, 1 extra bit of CHR select, and 2 extra bits of PRG select.
 
== References ==
* [http://www.romhacking.net/documents/362/ NES mapper list by Disch]

Latest revision as of 11:51, 3 March 2023

Mapper 113
Company unknown
Boards unknown
PRG ROM capacity 256K
PRG ROM window 32K
PRG RAM capacity None
CHR capacity 128K
CHR window 8k
Nametable mirroring H or V, controlled by mapper
Bus conflicts No
IRQ No
Audio No
iNES mappers 113

iNES Mapper 113 denotes the HES NTD-8 circuit board, used to create multicarts made for a bunch of NINA-03/06 games.

Example Games:

  • HES 6-in-1
  • Mind Blower Pak
  • Total Funpak

Banks

  • CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB)
  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB)

Registers

Control Register

This register is located at addresses: 

F        bit      0
---- ---- ---- ----
010x xxx1 xxxx xxxx

That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx. 

7  bit  0
---- ----
MCPP PCCC
|||| ||||
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF
+---------- Mirroring control (0 = Horizontal, 1 = Vertical)

Note the high bit of the CHR select is shifted away from the others.

Variants

This mapper extends the NINA-03/06 with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add mirroring control, 1 extra bit of CHR select, and 2 extra bits of PRG select.

References

Retrieved from "https://www.nesdev.org/w/index.php?title=INES_Mapper_113&oldid=20481"