INES Mapper 093: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Deprecation)
m (Updated deprecated bootgod links to NESCartDB equivalent.)
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers|093]][[Category:Discrete logic mappers|093]][[Category:in NesCartDB|093]]
[[Category:iNES Mappers|093]][[Category:Discrete logic mappers|093]][[Category:in NesCartDB|093]]
This is part of a family of Sunsoft mappers used largely by Japanese games: ([[iNES Mapper 089]], [[iNES Mapper 093]], [[iNES Mapper 184]])
This is part of a family of Sunsoft mappers used by Japanese games: ([[iNES Mapper 089]], [[iNES Mapper 093]], [[iNES Mapper 184]])


This mapper is used by Shanghai (J) which uses the [[Sunsoft 2 pinout|Sunsoft-2 IC]] on the Sunsoft-3R board, as well as Fantasy Zone (J) which was programmed to work on both the Sunsoft-3R board and a different one that used the [[Sunsoft 1 pinout|Sunsoft-1 IC]] (see [[iNES Mapper 184|Mapper 184]] for more information). [[iNES Mapper 089|Mapper 89]] uses the same Sunsoft-2 IC but on the Sunsoft-3 board and so differs in that it has mapper-controlled one-screen mirroring and CHR ROM banking. Note that the CHR bank lines are still hooked up to the RAM, explaining the RAM enable bit. For homebrew and hacks, games with CHR ROM should use 89's banking behavior with fixed mirroring.
This mapper represents the [[Sunsoft 2 pinout|Sunsoft-2 IC]] on the Sunsoft-3R board. It is used by [https://nescartdb.com/profile/view/3142/shanghai Shanghai], as well as [https://nescartdb.com/profile/view/3858/fantasy-zone Fantasy Zone] whose program is compatible with both this board and a different one that used the [[Sunsoft 1 pinout|Sunsoft-1 IC]].


Despite the mapper existing as a single IC, its functionality is describable using just a [[74377]] and a [[7432]] and should probably be considered discrete logic.
[[iNES Mapper 089|Mapper 89]] uses the same Sunsoft-2 IC but on the Sunsoft-3 board and so differs in that it has mapper-controlled one-screen mirroring and CHR ROM banking. Note that the CHR bank lines are still hooked up to the RAM, explaining the RAM enable bit. For homebrew and hacks, games with CHR ROM should use 89's banking behavior with fixed mirroring.


This mapper is deprecated for new development. Homebrew projects other than mapper tests should use [[UxROM]] ([[iNES Mapper 002]]) instead.
Despite the mapper existing as a single IC, its functionality [[Sunsoft 2 pinout|is describable]] using just a [[74377]] and a [[7432]] and should probably be considered discrete logic.


Here is the documentation in [[INES_Mapper_DischDocs|disch's original style]]:   
Here is the documentation in [[INES_Mapper_DischDocs|disch's original style]]:   
Line 15: Line 15:
     $8000-FFFF:  [.PPP ...E]
     $8000-FFFF:  [.PPP ...E]
       P = PRG Reg  (16k @ $8000)
       P = PRG Reg  (16k @ $8000)
       E = CHR RAM enable (write 1 here for normal operation)
       E = CHR RAM enable:
          0 = RAM is disabled; writes are ignored and reads are open bus
              (like [[iNES Mapper 185]] except no games use this)
          1 = normal operation.
    
    
    
    

Latest revision as of 01:43, 14 September 2023

This is part of a family of Sunsoft mappers used by Japanese games: (iNES Mapper 089, iNES Mapper 093, iNES Mapper 184)

This mapper represents the Sunsoft-2 IC on the Sunsoft-3R board. It is used by Shanghai, as well as Fantasy Zone whose program is compatible with both this board and a different one that used the Sunsoft-1 IC.

Mapper 89 uses the same Sunsoft-2 IC but on the Sunsoft-3 board and so differs in that it has mapper-controlled one-screen mirroring and CHR ROM banking. Note that the CHR bank lines are still hooked up to the RAM, explaining the RAM enable bit. For homebrew and hacks, games with CHR ROM should use 89's banking behavior with fixed mirroring.

Despite the mapper existing as a single IC, its functionality is describable using just a 74377 and a 7432 and should probably be considered discrete logic.

Here is the documentation in disch's original style:

 Registers **BUS CONFLICTS**:
 --------------------------
   
   $8000-FFFF:  [.PPP ...E]
     P = PRG Reg  (16k @ $8000)
     E = CHR RAM enable:
         0 = RAM is disabled; writes are ignored and reads are open bus
             (like iNES Mapper 185 except no games use this)
         1 = normal operation.
 
 
 PRG Setup:
 --------------------------
 
       $8000   $A000   $C000   $E000  
     +---------------+---------------+
     |     $8000     |     { -1}     |
     +---------------+---------------+