INES Mapper 049: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (iNES category sorting)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers]][[Category:MMC3-like mappers]]
[[Category:iNES Mappers|049]][[Category:MMC3-like mappers|049]]
   Here are Disch's original notes:   
   Here are Disch's original notes:   
   ========================
   ========================
Line 13: Line 13:
   ---------------------------
   ---------------------------
    
    
   Yet another MMC3 multicart.  For info on MMC3, see mapper 004.
   Yet another [[MMC3]] multicart.  For info on MMC3, see [[INES Mapper 004|mapper 004]].
    
    
   There is no PRG-RAM.  The multicart reg lies at $6000-7FFF, but is only writable when MMC3 PRG-RAM is enabled
   There is no PRG-RAM.  The multicart reg lies at $6000-7FFF, but is only writable when MMC3 PRG-RAM is enabled

Latest revision as of 08:39, 28 September 2012

 Here are Disch's original notes:  
 ========================
 =  Mapper 049          =
 ========================
 
 Example Game:
 --------------------------
 Super HIK 4-in-1
 
 
 Notes:
 ---------------------------
 
 Yet another MMC3 multicart.  For info on MMC3, see mapper 004.
 
 There is no PRG-RAM.  The multicart reg lies at $6000-7FFF, but is only writable when MMC3 PRG-RAM is enabled
 and writable (see $A001)
 
 
 Registers:
 ---------------------------
 
   $6000-7FFF:  [BBPP ...O]  Multicart reg
        B = Block
        P = 32k PRG Reg
        O = PRG Mode (0=32k mode)
 
   $8000-FFFF:  Same as MMC3 for selected block
 
 
 Each block is 128k PRG and 128k CHR
 
 
 
 PRG Setup:
 ---------------------------
 
   When the 'O' mode bit is clear, ordinary MMC3 PRG regs are ignored, and instead, 32k PRG page 'P' is swapped
 in at $8000.  When 'O' is set, 'P' is ignored, and MMC3 PRG regs work normally for the current block.
 
 
 Powerup:
 ---------------------------
 
 $6000 set to 0 on powerup.