Taito X1-005 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(s -> fr; F -> f) |
(pin 32 behavior depends on value written to $7EF8) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
.---\/---. | .---\/---. | ||
(r) PRG A18 <- |01 48| -- VCC | |||
(f) M2 -> |02 47| -> PRG A17 (r) | (f) M2 -> |02 47| -> PRG A17 (r) | ||
(fr) CPU A12 -> |03 46| -> PRG A15 (r) | (fr) CPU A12 -> |03 46| -> PRG A15 (r) | ||
| Line 18: | Line 18: | ||
(fr) CPU D2 <> |15 34| <> PRG D4 (fr) | (fr) CPU D2 <> |15 34| <> PRG D4 (fr) | ||
(f) CPU R/W -> |16 33| <> PRG D3 (fr) | (f) CPU R/W -> |16 33| <> PRG D3 (fr) | ||
(r) CHR A17 <- |17 32| - | (r) CHR A17 <- |17 32| -> /RAMREGION | ||
GND -- |18 31| -> CIRAM A10 (f) | GND -- |18 31| -> CIRAM A10 (f) | ||
(r) CHR A15 <- |19 30| -> CHR A14 (r) | (r) CHR A15 <- |19 30| -> CHR A14 (r) | ||
| Line 25: | Line 25: | ||
(f) PPU A11 -> |22 27| -> CHR A16 (r) | (f) PPU A11 -> |22 27| -> CHR A16 (r) | ||
(f) PPU A12 -> |23 26| -> CHR A10 (r) | (f) PPU A12 -> |23 26| -> CHR A10 (r) | ||
Vbat -- |24 25| -- Vbb | |||
`--------' | `--------' | ||
| Line 31: | Line 31: | ||
'''(f) CIRAM A10''' <- |17 32| -- NC | '''(f) CIRAM A10''' <- |17 32| -- NC | ||
GND -- |18 31| -> '''NC''' | GND -- |18 31| -> '''NC''' | ||
pin 32 "goes low for the whole duration of read/write cycle when address in 0x6000 .. 0x7FFF", or if the X1-005's internal RAM is enabled, only the region of 0x6000-0x7EFF. | |||
Sources: | |||
* [//forums.nesdev.org/viewtopic.php?t=3834 BootGod] | |||
* [//forums.nesdev.org/viewtopic.php?t=19760 Krzysiobal] | |||
Latest revision as of 22:34, 3 November 2020
Taito X1-005: 48-pin 0.6" PDIP (Canonically mapper 80).
.---\/---.
(r) PRG A18 <- |01 48| -- VCC
(f) M2 -> |02 47| -> PRG A17 (r)
(fr) CPU A12 -> |03 46| -> PRG A15 (r)
(f) CPU A13 -> |04 45| -> PRG A14 (r)
(f) CPU A14 -> |05 44| -> PRG A13 (r)
(fr) CPU A6 -> |06 43| <- CPU A8 (fr)
(fr) CPU A5 -> |07 42| <- CPU A9 (fr)
(fr) CPU A4 -> |08 41| <- CPU A11 (fr)
(fr) CPU A3 -> |09 40| -> PRG A16 (r)
(fr) CPU A2 -> |10 39| <- CPU A10 (fr)
(fr) CPU A1 -> |11 38| <- /ROMSEL (fr)
(fr) CPU A0 -> |12 37| <> PRG D7 (fr)
(fr) CPU D0 <> |13 36| <> PRG D6 (fr)
(fr) CPU D1 <> |14 35| <> PRG D5 (fr)
(fr) CPU D2 <> |15 34| <> PRG D4 (fr)
(f) CPU R/W -> |16 33| <> PRG D3 (fr)
(r) CHR A17 <- |17 32| -> /RAMREGION
GND -- |18 31| -> CIRAM A10 (f)
(r) CHR A15 <- |19 30| -> CHR A14 (r)
(r) CHR A12 <- |20 29| -> CHR A13 (r)
(f) PPU A10 -> |21 28| -> CHR A11 (r)
(f) PPU A11 -> |22 27| -> CHR A16 (r)
(f) PPU A12 -> |23 26| -> CHR A10 (r)
Vbat -- |24 25| -- Vbb
`--------'
Variant pinout for mapper 207:
(f) CIRAM A10 <- |17 32| -- NC
GND -- |18 31| -> NC
pin 32 "goes low for the whole duration of read/write cycle when address in 0x6000 .. 0x7FFF", or if the X1-005's internal RAM is enabled, only the region of 0x6000-0x7EFF.
Sources:
