Bandai LZ93D50 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (formatting) |
(add links to naruko's wiki. Datach: external I²C SCL is CHR A13; PPU A12 is not connected.) |
||
Line 52: | Line 52: | ||
This IC is actually a 52-pin QFP, with a slightly different pin order from the PDIP instantiation. The pertinent changes: | This IC is actually a 52-pin QFP, with a slightly different pin order from the PDIP instantiation. The pertinent changes: | ||
* I²C SCL is only for the internal EEPROM | * I²C SCL is only for the internal EEPROM | ||
* CHR | * CHR A13 is External I²C SCL | ||
* WRAM /CS drives a tristateable buffer that connects barcode data to CPU D3. | * WRAM /CS drives a tristateable buffer that connects barcode data to CPU D3. | ||
See also: | |||
* http://seesaawiki.jp/famicomcartridge/d/Bandai%20Datach | |||
* http://seesaawiki.jp/famicomcartridge/d/Bandai%20LZ93D50%20standard |
Revision as of 20:51, 25 February 2014
Bandai LZ93D50: 52-pin shrink PDIP (Canonically iNES Mapper 159)
.---\/---. ?? | 1 52 | -- +5V ?? | 2 51 | -> PRG RAM /CS PRG /CE <- | 3 50 | ?? ? +5V ?? | 4 49 | ?? +5V M2 -> | 5 48 | ?? ? CPU A13 -> | 6 47 | -> PRG A17 CPU A14 -> | 7 46 | -> PRG A15 CPU A3 -> | 8 45 | -> PRG A14 CPU A2 -> | 9 44 | -> PRG A16 CPU A1 -> | 10 43 | <- CPU D7 CPU A0 -> | 11 42 | <- CPU D6 /ROMSEL -> | 12 41 | <- CPU D5 CPU D0 -> | 13 40 | <> CPU D4 CPU D1 -> | 14 39 | <- CPU D3 CPU D2 -> | 15 38 | -> /IRQ R/W -> | 16 37 | -> CIRAM A10 PPU /RD -> | 17 36 | -> CHR A17 CHR A15 <- | 18 35 | -> CHR A14 CHR A12 <- | 19 34 | -> CHR A13 PPU A10 -> | 20 33 | -> CHR A11 PPU A11 -> | 21 32 | -> CHR A16 PPU A12 -> | 22 31 | -> CHR A10 PPU A13 -> | 23 30 | -> CHR /CE GND -- | 24 29 | <- ** ? ?? | 25 28 | -> I²C SCL GND -- | 26 27 | <> I²C SDA '--------' ** Grounded on BA-JUMP2. Floating on other games. Seems likely to be an enable for reading I²C from $6000-$7fff (internal pullup, normally floating)
Bandai's variants of the LZ93D50 are almost as bad as MMC1.
BA-JUMP2: supports PRG RAM instead of I²C, replaces banked CHR-ROM with unbanked CHR-RAM, and increases PRG max to 512KiB:
PPU /RD -> | 17 36 | -> n/c n/c <- | 18 35 | -> n/c n/c <- | 19 34 | -> n/c PPU A10 -> | 20 33 | -> n/c PPU A11 -> | 21 32 | -> n/c GND -> | 22 31 | -> PRG A18 GND -> | 23 30 | -> n/c GND -- | 24 29 | <- GND ? ?? | 25 28 | -> PRG RAM +CS GND -- | 26 27 | <> n/c '--------'
Datach Joint ROM System: Two separate I²C clocks, replaces banked CHR-ROM with unbanked CHR-RAM, and external barcode reader.
This IC is actually a 52-pin QFP, with a slightly different pin order from the PDIP instantiation. The pertinent changes:
- I²C SCL is only for the internal EEPROM
- CHR A13 is External I²C SCL
- WRAM /CS drives a tristateable buffer that connects barcode data to CPU D3.
See also: