PPU attribute tables

The attribute table is a 64-byte array at the end of each nametable that controls which palette is assigned to each part of the background.

Each attribute table, starting at $23C0, $27C0, $2BC0, or $2FC0, is arranged as an 8x8 byte array:

       2xx0    2xx1    2xx2    2xx3    2xx4    2xx5    2xx6    2xx7
     ,-------+-------+-------+-------+-------+-------+-------+-------.
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xC0:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xC8:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xD0:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xD8:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xE0:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xE8:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
2xF0:| - + - | - + - | - + - | - + - | - + - | - + - | - + - | - + - |
     |   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     +-------+-------+-------+-------+-------+-------+-------+-------+
2xF8:|   .   |   .   |   .   |   .   |   .   |   .   |   .   |   .   |
     `-------+-------+-------+-------+-------+-------+-------+-------'

,---+---+---+---.
|   |   |   |   |
+ D1-D0 + D3-D2 +
|   |   |   |   |
+---+---+---+---+
|   |   |   |   |
+ D5-D4 + D7-D6 +
|   |   |   |   |
`---+---+---+---'

Each byte controls the palette of a 32×32 pixel or 4×4 tile part of the nametable and is divided into four 2-bit areas. Each area covers 16×16 pixels or 2×2 tiles, the size of a [?] block in Super Mario Bros. Given palette numbers topleft, topright, bottomleft, bottomright, each in the range 0 to 3, the value of the byte is

value = (bottomright << 6) | (bottomleft << 4) | (topright << 2) | (topleft << 0)

Or equivalently:

7654 3210
|||| ||++- Color bits 3-2 for top left quadrant of this byte
|||| ++--- Color bits 3-2 for top right quadrant of this byte
||++------ Color bits 3-2 for bottom left quadrant of this byte
++-------- Color bits 3-2 for bottom right quadrant of this byte

Most games for the NES use 16×16 pixel metatiles (size of Super Mario Bros. ? block) or 32x32 pixel metatiles (width of SMB pipe) in order to align the map with the attribute areas.

Worked example

The background in the game Thwaite, with an overlaid attribute grid.

Each 16x16 pixel color area has one of four color sets assigned to it, and one byte controls four color areas.

The background palette is divided into four color sets.

Consider the byte at $23F2:

 ,---- Top left
 3 1 - Top right
 2 2 - Bottom right
 `---- Bottom left

The byte has color set 2 at bottom right, 2 at bottom left, 1 at top right, and 3 at top left. Thus its attribute is calculated as follows:

value = (bottomright << 6) | (bottomleft << 4) | (topright << 2) | (topleft << 0)
      = (2           << 6) | (2          << 4) | (1        << 2) | (3       << 0)
      = $80                | $20               | $04             | $03
      = $A7

To find the address of an attribute byte corresponding to a nametable address, see: PPU scrolling: Tile and attribute fetching

Glitches

There are some well-known glitches when rendering attributes in NES and Famicom games.

While the attribute table specifies one of four three-color palettes for each 16x16 pixel region, the left-side clipping window in PPUMASK ($2001) is only 8 pixels wide.

This is the reason why games that use either horizontal or vertical mirroring modes for arbitrary-direction scrolling often have color artifacts on one side of the screen (on the right side in Super Mario Bros. 3; on the trailing side of the scroll in Kirby's Adventure; and at the top and bottom in Super C).

The game Alfred Chicken hides glitches on the left and right sides by using both left clipping and hiding the right side of the screen under solid-colored sprites. To mask the entire 240-scanline height, this approach would occupy 15 entries of 64 in the sprite table in 8x16 sprite mode, or 30 entries in the 8x8 mode.

See also

• this page in Chinese