Namcot 163 family pinout

The Namcot 129 and 163 seem to be identical. The Namcot 175 and 340 have minor but vital differences.

Namcot 129 and 163: 48-pin QFP (canonically iNES Mapper 019)

                             /   \
            (f) SOUND   <-  /01 48\ -> CHR A14 (r)
           (r) CHR A13 <-  /02   47\ -> CHR A15 (r)
          (r) CHR A12 <-  /03     46\ -> CHR A16 (r)
         (r) CHR A11 <-  /04       45\ -> CHR A17 (r)
       (fr)*CHR A10 <-  /05         44\ -> ?
               GND  -  /06           43\ -- +5v
      (r) PRG A18 <-  /07             42\ -> CIRAM /CE (f)
     (r) PRG A17 <-  /08               41\ -> CHR ROM /CE (r)
    (r) PRG A16 <-  /09                 40\ -> WRAM /CE (w)
   (r) PRG A15 <-  /10                   39\ -> /IRQ (f)
  (r) PRG A14 <-  /11                     38\ <- PPU A10 (f)
 (r) PRG A13 <-  /12                       37\ <- PPU A11 (f)
(fr)  CPU D7 <-> \13                       36/ <- PPU A12 (f)
 (fr)  CPU D6 <-> \14                     35/ <- PPU A13 (f)
  (fr)  CPU D5 <-> \15                   34/ -- GND?
   (fr)  CPU D4 <-> \16                 33/ <- PPU /RD (f)
    (fr)  CPU D3 <-> \17               32/ -- +5V
     (fr)  CPU D2 <-> \18             31/ -- GND
               +5v  -  \19           30/ <- M2 (f)
       (fr)  CPU D1 <-> \20         29/ <- R/W (fw)
        (fr)  CPU D0 <-> \21       28/ <- /ROMSEL (f)
                 GND?  -  \22     27/ <- CPU A14 (f)
           (r) PRG /CE  <- \23   26/ <- CPU A13 (f)
           (fr) CPU A11  -> \24 25/ <- CPU A12 (fr)
                             \   /
                              \_/
05 also connects to CIRAM A10
19,32,43 Some boards connect a battery (through a standard diode switch) to this pin to make the waveform memory nonvolatile
22 Some boards this is connected to +5V, some to Gnd, so probably an input
30 pull-down resistor present on boards with battery for low-power mode
33 Ground this pin with if CHR's nOE and nCS lines are separate
34 Probably an input instead of a power supply, can't find an example of it being used
40 6264 /CE connected to this pin
44 Might be an enable for CHR RAM, can't find an example of it being used

Namcot 175: 48-pin QFP (canonically iNES Mapper 210)

01 sound was removed
05 CIRAM A10 is hardwired to PPU A10 or A11 as appropriate
39 does not provide IRQs
42 does not allow for ROM nametables

Namcot 340: 48-pin QFP (not allocated a mapper)

 42\ -> ?
  41\ -> ?
   40\ -> CHR /CE (r)
    39\ -> CIRAM A10 (f)
01 sound was also removed.