NINA-003-006: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (add cat:gnrom-like) |
m (oversize m79 isn't honored in the way specified by Disch's documents, so don't imply it is) |
||
| Line 3: | Line 3: | ||
== Overview == | == Overview == | ||
* PRG ROM size: up to 256 KB | * PRG ROM size: up to 64KB ([[iNES Mapper 079|mapper 79]]) or up to 256 KB ([[iNES Mapper 113|mapper 113]]) | ||
* PRG ROM bank size: 32 KB | * PRG ROM bank size: 32 KB | ||
* PRG RAM: None | * PRG RAM: None | ||
* CHR ROM capacity: up to 128 KB | * CHR ROM capacity: up to 64KB (mapper 79) or up to 128 KB (mapper 113) | ||
* CHR bank size: 8 KB | * CHR bank size: 8 KB | ||
* Nametable [[mirroring]]: hardwired to vertical or horizontal mirroring | * Nametable [[mirroring]]: hardwired to vertical or horizontal mirroring (mapper 79) or controlled by mapper (mapper 113) | ||
* Subject to [[bus conflict]]s: No | * Subject to [[bus conflict]]s: No | ||
Revision as of 22:48, 21 October 2012
NINA-03 and NINA-06 are unlicensed boards produced by American Video Entertainment. They only differ in the nature of the CIC — the former always has a microcontroller, the latter may instead have a charge pump.
Overview
- PRG ROM size: up to 64KB (mapper 79) or up to 256 KB (mapper 113)
- PRG ROM bank size: 32 KB
- PRG RAM: None
- CHR ROM capacity: up to 64KB (mapper 79) or up to 128 KB (mapper 113)
- CHR bank size: 8 KB
- Nametable mirroring: hardwired to vertical or horizontal mirroring (mapper 79) or controlled by mapper (mapper 113)
- Subject to bus conflicts: No
Banks
- CPU $8000-$FFFF: 32 KB switchable PRG ROM bank
- PPU $0000-$1FFF: 8 KB switchable CHR ROM bank
Registers
Control Register
This register is located at addresses:
F bit 0 ---- ---- ---- ---- 010x xxx1 xxxx xxxx
That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.
7 bit 0 ---- ---- MCPP PCCC |||| |||| |+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF | ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF +---------- Select mirroring (clear: horizontal, set: verical)
The mirroring bit should only be honored on the board type used by HES 6-in-1, Mind Blower Pak, and Total Funpak (HES), which is mapper 113. On mapper 79, this bit is ignored.
