RP2C33 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(Added expansion audio mixing circuit.) |
(pins 61, 53, and 24 were determined experimentally on the discord.) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 6: | Line 6: | ||
(Rf) CPU A14 -> | 02 63 | <- XTAL2 | (Rf) CPU A14 -> | 02 63 | <- XTAL2 | ||
(Rf) CPU A13 -> | 03 62 | -> XTAL1 | (Rf) CPU A13 -> | 03 62 | -> XTAL1 | ||
(f) CPU A12 -> | 04 61 | <- | (f) CPU A12 -> | 04 61 | <- /EnableRAS (gnd) | ||
(f) CPU A11 -> | 05 60 | -> /RAS (r) | (f) CPU A11 -> | 05 60 | -> /RAS (r) | ||
(f) CPU A10 -> | 06 59 | -> /CAS1 (r) | (f) CPU A10 -> | 06 59 | -> /CAS1 (r) | ||
| Line 12: | Line 12: | ||
(f) CPU A8 -> | 08 57 | <- R/W (rf) | (f) CPU A8 -> | 08 57 | <- R/W (rf) | ||
(r) PRG A6/13 <- | 09 56 | <- M2 (Rf) | (r) PRG A6/13 <- | 09 56 | <- M2 (Rf) | ||
(r) PRG A5/12 <- | 10 55 | | (r) PRG A5/12 <- | 10 55 | +> /IRQ (f) | ||
(r) PRG A4/11 <- | 11 54 | -> Audio (f) | (r) PRG A4/11 <- | 11 54 | -> Audio (f) | ||
(r) PRG A3/10 <- | 12 53 | <- | (r) PRG A3/10 <- | 12 53 | <- +TestMode (gnd) | ||
(r) PRG A2/9 <- | 13 52 | | (r) PRG A2/9 <- | 13 52 | +> SER OUT | ||
(r) PRG A1/8 <- | 14 51 | <- SER IN | (r) PRG A1/8 <- | 14 51 | <- SER IN | ||
(r) PRG A0 <- | 15 50 | | (r) PRG A0 <- | 15 50 | +> $4025W.2 (Disk 1=Read, 0=Write) | ||
(rf) CPU A7 -> | 16 49 | | (rf) CPU A7 -> | 16 49 | +> $4025W.1 (1=Reset transfer timing) | ||
(f) CPU A6 -> | 17 48 | | (f) CPU A6 -> | 17 48 | +> $4025W.0 (1=Turn on motor) | ||
(f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected) | (f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected) | ||
(f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready) | (f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready) | ||
(f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing) | (f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing) | ||
(f) CPU A2 -> | 21 44 | <> EXT0 | (f) CPU A2 -> | 21 44 | <+> EXT0 | ||
(f) CPU A1 -> | 22 43 | <> EXT1 | (f) CPU A1 -> | 22 43 | <+> EXT1 | ||
(f) CPU A0 -> | 23 42 | <> EXT2 | (f) CPU A0 -> | 23 42 | <+> EXT2 | ||
/CE4100 <- | 24 41 | <+> EXT3 | |||
(rf) CPU D0 <> | 25 40 | <> EXT4 | (rf) CPU D0 <> | 25 40 | <+> EXT4 | ||
(rf) CPU D1 <> | 26 39 | <> EXT5 | (rf) CPU D1 <> | 26 39 | <+> EXT5 | ||
(rf) CPU D2 <> | 27 38 | <> EXT6 | (rf) CPU D2 <> | 27 38 | <+> EXT6 | ||
(rf) CPU D3 <> | 28 37 | <> EXT7/BATT | (rf) CPU D3 <> | 28 37 | <+> EXT7/BATT | ||
(rf) CPU D4 <> | 29 36 | <- PPU A10 (f) | (rf) CPU D4 <> | 29 36 | <- PPU A10 (f) | ||
(rf) CPU D5 <> | 30 35 | <- PPU A11 (f) | (rf) CPU D5 <> | 30 35 | <- PPU A11 (f) | ||
| Line 39: | Line 39: | ||
r - connects to DRAM (all revisions) | r - connects to DRAM (all revisions) | ||
f - connects to Famicom | f - connects to Famicom | ||
+ - output is open-drain, requires an external pull-up resistor | |||
Expansion audio mixing circuit schematic: | Expansion audio mixing circuit schematic: | ||
1.2M | |||
+---/\/---+ | |||
+ | | 56K | |||
From RP2C33---||---/\/---+---|>o---+---+---/\/---+ | |||
(RP2C33.54) 1u 2M | | | |||
0.1u --- | | |||
--- | | |||
| | 100K | |||
GND | +---/\/---+ | |||
| + | | | |||
From 2A03----------------------------------/\/---+---||---+---|>o---+---To RF | |||
(Cart.45) 56K 1u (Cart.46) | |||
Notes: | Notes: | ||
* PRG address bus is multiplexed, as is typical for DRAMs. | * PRG address bus is multiplexed, as is typical for DRAMs. | ||
* EXT port can be written via $4026 and read via $4033 | * EXT port can be written via $4026 and read via $4033 | ||
Transcribed from | Transcribed from https://web.archive.org/web/20140920224500/green.ap.teacup.com/junker/119.html | ||
Latest revision as of 21:58, 23 May 2024
Family Computer Disk System ASIC RP2C33 or RP2C33A: 64-pin shrink DIP (FDS files)
.---\/---.
(Rf) /ROMSEL -> | 01 64 | -- +5V
(Rf) CPU A14 -> | 02 63 | <- XTAL2
(Rf) CPU A13 -> | 03 62 | -> XTAL1
(f) CPU A12 -> | 04 61 | <- /EnableRAS (gnd)
(f) CPU A11 -> | 05 60 | -> /RAS (r)
(f) CPU A10 -> | 06 59 | -> /CAS1 (r)
(f) CPU A9 -> | 07 58 | -> /CAS0 (r)
(f) CPU A8 -> | 08 57 | <- R/W (rf)
(r) PRG A6/13 <- | 09 56 | <- M2 (Rf)
(r) PRG A5/12 <- | 10 55 | +> /IRQ (f)
(r) PRG A4/11 <- | 11 54 | -> Audio (f)
(r) PRG A3/10 <- | 12 53 | <- +TestMode (gnd)
(r) PRG A2/9 <- | 13 52 | +> SER OUT
(r) PRG A1/8 <- | 14 51 | <- SER IN
(r) PRG A0 <- | 15 50 | +> $4025W.2 (Disk 1=Read, 0=Write)
(rf) CPU A7 -> | 16 49 | +> $4025W.1 (1=Reset transfer timing)
(f) CPU A6 -> | 17 48 | +> $4025W.0 (1=Turn on motor)
(f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected)
(f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready)
(f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing)
(f) CPU A2 -> | 21 44 | <+> EXT0
(f) CPU A1 -> | 22 43 | <+> EXT1
(f) CPU A0 -> | 23 42 | <+> EXT2
/CE4100 <- | 24 41 | <+> EXT3
(rf) CPU D0 <> | 25 40 | <+> EXT4
(rf) CPU D1 <> | 26 39 | <+> EXT5
(rf) CPU D2 <> | 27 38 | <+> EXT6
(rf) CPU D3 <> | 28 37 | <+> EXT7/BATT
(rf) CPU D4 <> | 29 36 | <- PPU A10 (f)
(rf) CPU D5 <> | 30 35 | <- PPU A11 (f)
(rf) CPU D6 <> | 31 34 | -> CIRAM A10 (f)
GND -- | 32 33 | <> CPU D7 (rf)
'--------'
R - connects to LH2833 DRAM in later PCB revisions
r - connects to DRAM (all revisions)
f - connects to Famicom
+ - output is open-drain, requires an external pull-up resistor
Expansion audio mixing circuit schematic:
1.2M
+---/\/---+
+ | | 56K
From RP2C33---||---/\/---+---|>o---+---+---/\/---+
(RP2C33.54) 1u 2M | |
0.1u --- |
--- |
| | 100K
GND | +---/\/---+
| + | |
From 2A03----------------------------------/\/---+---||---+---|>o---+---To RF
(Cart.45) 56K 1u (Cart.46)
Notes:
- PRG address bus is multiplexed, as is typical for DRAMs.
- EXT port can be written via $4026 and read via $4033
Transcribed from https://web.archive.org/web/20140920224500/green.ap.teacup.com/junker/119.html
