Talk:Sunsoft FME-7: Difference between revisions
mNo edit summary |
Rainwarrior (talk | contribs) |
||
Line 20: | Line 20: | ||
Qbradq disappeared from the forums close to a year ago. I'm tempted to remove most of the details about the nesdev1. --[[User:Lidnariq|Lidnariq]] 19:46, 18 August 2012 (MDT) | Qbradq disappeared from the forums close to a year ago. I'm tempted to remove most of the details about the nesdev1. --[[User:Lidnariq|Lidnariq]] 19:46, 18 August 2012 (MDT) | ||
:Personally I don't see why there should be any info on the wiki about a proposed cartridge that's never had a public release/production. - [[User:Rainwarrior|Rainwarrior]] 00:54, 19 August 2012 (MDT) |
Revision as of 06:54, 19 August 2012
2048KB of PRG ROM and 512KB of PRG RAM? The FME-7 only has 44 pins (2 of which are unconnected on NES-BTR), and the existing pins only permit up to 512KB of PRG ROM. Just because the data bus is 8 bits wide does not mean that the registers themselves are that wide, and there's also no guarantee that such amounts of PRG RAM are also supported - for example, the MMC3 PRG bank registers are only 6 bits wide, leaving the chip physically incapable of addressing more than 512KB of data, and while the MMC5 can address 1024KB of PRG ROM, it cannot support more than 64KB of PRG RAM. I'm only pointing this out because I don't appreciate my emulator being listed with a bunch of potentially erroneous compatibility errors. --Quietust 17:26, 17 April 2011 (UTC)
I meant no offense Quietust. I suppose I need to make clear that the extended ROM and RAM amounts are only for the NESDEV1 version of FME-7. I will change the page to reflect this. Nintendulator is 100% compatible with the real FME-7. --qbradq 19:45, 17 April 2011 (UTC)
PRG RAM on the original mapper
When PRG RAM is swapped into $6000, what does the original hardware put on the PRG bank lines? --Tepples 23:24, 20 April 2011 (UTC)
Sunsoft vs. FDS
This may sound funny, but it looks like FDS IRQs may be possible (with modifications) with the Sunsoft Mapper...
And Also the thing with ROM at $6000... It seems possible that this was meant for porting FDS using traditional ROM in place of PRG-RAM.
Can anyone help me test these to verify? --Hamtaro126 08:20, 18 August 2012 (MDT)
- FME-7 might be a sensible choice for porting FDS. I doubt that it was designed with this in mind, though. There is ROM at $6000 because it gives you more addressable space. There is a timer IRQ because timers are useful. I don't think you need any more justification than that. There weren't any FDS games ported to FME-7. - Rainwarrior 16:51, 18 August 2012 (MDT)
NESDEV1
Qbradq disappeared from the forums close to a year ago. I'm tempted to remove most of the details about the nesdev1. --Lidnariq 19:46, 18 August 2012 (MDT)
- Personally I don't see why there should be any info on the wiki about a proposed cartridge that's never had a public release/production. - Rainwarrior 00:54, 19 August 2012 (MDT)