CPU status flag behavior: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(→‎The B flag: in http://nesdev.parodius.com/bbs/viewtopic.php?p=64224#64224 koitsu said this page was "highly convoluted")
(merging into Status flags)
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The '''flags''' register, also called '''processor status''' or just '''P''', is one of the six architectural registers on the 6502 family CPU.
#REDIRECT [[Status flags]]
 
There are six bits in P:
<pre>
7654 3210
||  ||||
||  |||+- C: 1 if last addition or shift resulted in a carry, or if
||  |||  last subtraction resulted in
||  ||+-- Z: 1 if last operation resulted in a 0 value
||  |+--- I: Interrupt priority level
||  |    (0: /IRQ and /NMI get through; 1: only /NMI gets through)
||  +---- D: 1 to make ADC and SBC use binary-coded decimal arithmetic
||        (ignored on second-source 6502 like that in the NES)
|+-------- V: 1 if last ADC or SBC resulted in signed overflow, or
|          D6 from last BIT read as 0
+--------- N: Set to bit 7 of the last operation
</pre>
 
== The B flag ==
There are six and only six flags in the processor status register.
Despite what some 6502 references might appear to claim on a first reading, there is no "B flag" in the CPU.
 
Two interrupts (/[[IRQ]] and /[[NMI]]) and two instructions (PHP and BRK) push the flags to the stack. Bit 5 is always set to 1, and bit 4 is 1 if from an instruction (PHP or BRK) or 0 if from an interrupt (/IRQ or /NMI).
{| class="tabular"
|-
! Instruction || Bits 5 and 4 || Side effects after pushing
|-
| PHP || 11 || None
|-
| BRK || 11 || I is set to 1
|-
| /[[IRQ]] || 10 || I is set to 1
|-
| /[[NMI]] || 10 || I is set to 1
|}
Two instructions (PLP and RTI) pull a byte from the stack and set flags. They ignore bits 5 and 4.
 
The only way for an IRQ handler to distinguish /IRQ from BRK is to read the flags from the stack and test bit 4.
The slowness of this is one reason why BRK wasn't used as a syscall mechanism.
Instead, it was more often used to trigger a patching mechanism that hung off the /IRQ vector: a single byte in PROM, UVEPROM, flash, etc. would be forced to 0, and the IRQ handler would pick something to do instead based on the program counter.
 
== External links ==
*[http://nesdev.parodius.com/bbs/viewtopic.php?p=64224#64224 koitsu's explanation]

Latest revision as of 20:17, 24 October 2018

Redirect to: