VRC1: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (→Overview: no pin for WRAM) |
(→Overview: 16 8 KB banks implies a limit of 128 KB) |
||
Line 7: | Line 7: | ||
== Overview == | == Overview == | ||
* PRG ROM size: Up to 128 KB | |||
* PRG ROM bank size: 8 KB at $8000, $A000, and $C000 | * PRG ROM bank size: 8 KB at $8000, $A000, and $C000 | ||
* PRG RAM: None | * PRG RAM: None |
Revision as of 05:59, 10 September 2012
The Konami VRC1 is an ASIC mapper.
Overview
- PRG ROM size: Up to 128 KB
- PRG ROM bank size: 8 KB at $8000, $A000, and $C000
- PRG RAM: None
- CHR bank size: 4 KB
- Nametable mirroring: Controlled by mapper
- Subject to bus conflicts: No
Registers
PRG Select 0 ($8000-$8FFF)
7 bit 0 --------- .... PPPP |||| ++++- Select 8 KB PRG ROM at $8000
PRG Select 1 ($A000-$AFFF)
7 bit 0 --------- .... PPPP |||| ++++- Select 8 KB PRG ROM at $A000
PRG Select 2 ($C000-$CFFF)
7 bit 0 --------- .... PPPP |||| ++++- Select 8 KB PRG ROM at $C000
Mirroring Control, CHR bits ($9000-$9FFF)
7 bit 0 --------- .... .BAM ||| ||+- Mirroring (0: Vertical; 1: Horizontal) |+-- High Bit of 4 KB CHR bank at PPU $0000 +--- High Bit of 4 KB CHR bank at PPU $1000
CHR Select 0 ($E000-$EFFF)
7 bit 0 --------- .... CCCC |||| ++++- Low 4 bits of 4 KB CHR bank at PPU $0000
These bits combined with bit 1 of $9000 make a 5-bit CHR selection.
CHR Select 1 ($F000-$FFFF)
7 bit 0 --------- .... CCCC |||| ++++- Low 4 bits of 4 KB CHR bank at PPU $1000
These bits combined with bit 2 of $9000 make a 5-bit CHR selection.