TKSROM: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
(FC only; US RPGs were more likely to simulate 1 screen by using h mirroring and a scanline IRQ to skip the second nametable) |
Rainwarrior (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[Category:Nintendo licensed mappers]] | |||
'''TKSROM''' refers to a variant of the [[TKROM]] board with the VRAM mirroring signals routed through the CHR side of the [[MMC3|Nintendo MMC3]] a different way, as described in [[iNES Mapper 118]]. | '''TKSROM''' refers to a variant of the [[TKROM]] board with the VRAM mirroring signals routed through the CHR side of the [[MMC3|Nintendo MMC3]] a different way, as described in [[iNES Mapper 118]]. | ||
It is used only for the Japanese game ''Ys III: Wanderers from Ys''. | It is used only for the Japanese game ''Ys III: Wanderers from Ys''. | ||
Revision as of 21:26, 21 April 2015
TKSROM refers to a variant of the TKROM board with the VRAM mirroring signals routed through the CHR side of the Nintendo MMC3 a different way, as described in iNES Mapper 118. It is used only for the Japanese game Ys III: Wanderers from Ys.
Overview
- PRG ROM size: 128, 256 or 512 KB (DIP-28/32 Nintendo pinout)
- PRG ROM bank size: 8 KB
- PRG RAM: 8 KB with optional battery
- CHR capacity: 128 KB ROM (DIP-32 Nintendo pinout)
- CHR bank size: 1 KB and 2 KB
- Nametable mirroring: Controlled by mapper, but in a nonstandard way (see Mapper 118).
- Subject to bus conflicts: No
Solder Pad Config
To be added.
