FxROM
From NESdev Wiki
(Redirected from FKROM)
Jump to navigationJump to search
The generic designation FxROM refers to cartridge boards made by Nintendo that use the Nintendo MMC4 mapper.
Board Types
The following FxROM boards are known to exist:
| Board | PRG ROM | PRG RAM | CHR |
|---|---|---|---|
| FJROM | 128 / 256 KB | 8 KB | 16 / 32 / 64 KB ROM |
| FKROM | 128 / 256 KB | 8 KB | 128 KB ROM |
Overview
- PRG ROM size: up to 256 KB
- PRG ROM bank size: 16 KB
- PRG RAM: 8 KB plus optional battery
- CHR capacity: up to 128 KB ROM
- CHR bank size: 4 KB
- Nametable mirroring: Controlled by mapper
- Subject to bus conflicts: No
Solder Pad config
Battery backup
- PRG RAM with data retention : 'SL' disconnected, D1, D2, R1, R2, R3 present.
- PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present.
On the FKROM board, battery backup appears to be compulsory unless there is a hidden solder pad below the MM1026 chip.
Hardware
The FKROM board uses a Mitsumi MM1026 chip dedicated to safe battery backup. It's the only Nintendo board to use a specific chip dedicated to safe battery backup.
