INES Mapper 113

From NESdev Wiki
Revision as of 18:33, 7 June 2015 by Rainwarrior (talk | contribs) (infobox)
Jump to navigationJump to search
Mapper 113
Company unknown
Boards unknown
PRG ROM capacity 256K
PRG ROM window 32K
PRG RAM capacity None
CHR capacity 128K
CHR window 8k
Nametable mirroring H or V, controlled by mapper
Bus conflicts No
IRQ No
Audio No
iNES mappers 113

iNES Mapper 113 is used to designate a multicart made for a bunch of NINA-03/06 games. The board name of these larger multicarts is unknown, as none are in NesCartDB.

Example Games:

  • HES 6-in-1
  • Mind Blower Pak
  • Total Funpak

Banks

  • CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB)
  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB)

Registers

Control Register

This register is located at addresses:

F        bit      0
---- ---- ---- ----
010x xxx1 xxxx xxxx

That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.

7  bit  0
---- ----
MCPP PCCC
|||| ||||
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF
+---------- Mirroring control (0 = Horizontal, 1 = Vertical)

Note the high bit of the CHR select is shifted away from the others.

Variants

This mapper extends the NINA-03/06 with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add mirroring control, 1 extra bit of CHR select, and 2 extra bits of PRG select.

References