INES Mapper 043
From NESdev Wiki
Jump to navigationJump to search
iNES Mapper 043 is used for the TONY-I and YS-612 circuit boards, both containing conversions of Super Mario Brothers 2 (Japanese) from Famicom Disk System to ROM cartridge. There are two 32 KiB, one 2 KiB and one 8 KiB PRG-ROM chip. iNES-format ROM images first include the data of both 32 KiB ROM chips, then the data of the 2 KiB chip repeated four times, then the data of the 8 KiB ROM chip, for a total of 80 KiB of PRG-ROM.
Banks
- CPU $5000-$5FFF: 2 KiB PRG-ROM bank, repeated once, from 2 KiB PRG-ROM chip
- CPU $6000-$7FFF: 8 KiB PRG-ROM bank, fixed to #2, from 2x32 KiB PRG-ROM chips
- CPU $8000-$9FFF: 8 KiB PRG-ROM bank, fixed to #1, from 2x32 KiB PRG-ROM chips
- CPU $A000-$BFFF: 8 KiB PRG-ROM bank, fixed to #0, from 2x32 KiB PRG-ROM chips
- CPU $C000-$DFFF: 8 KiB PRG-ROM bank, switchable, from 2x32 KiB PRG-ROM chips
- CPU $E000-$FFFF: 8 KiB PRG-ROM bank from 8 KiB PRG-ROM chip
- PPU $0000-$1FFF: unbanked 8 KiB CHR-ROM
Registers
PRG Bank Select ($4022)
Mask: $71FF Bit 7654 3210 --------- .... .CCC +++- Select 8 KiB PRG-ROM bank at CPU $C000-$DFFF.
The actual bank number is:
Value Bank# ------------ 0 4 1 3 2 4 3 4 4 4 5 7 6 5 7 6
IRQ Control ($4122 on TONY-I, $8122 on YS-612)
Mask: $71FF? Bit 7654 3210 --------- .... ...I +- 0: Acknowledge and disable IRQ, reset counter 1: Enable IRQ
When enabled, the 12-bit IRQ counter increases on every M2 cycle until it overflows, upon which an IRQ is fired.
Notes
- FCEUX emulates a multicart extract of Mr. Mary 2 under this mapper number. Since that particular SMB2J conversion was never released in single-cartridge form, its description of is part of the multicarts' description.
- A modified iNES ROM file of YS-612 has different title screen variants in the four representations of the 2 KiB ROM chip. Nintendulator implements a dialog to switch between two of them.