INES Mapper 134
From NESdev Wiki
Jump to navigationJump to search
iNES Mapper 134 denotes an MMC3-clone-based multicart PCB referred to alternatively as T4A54A, WX-KB4K, or BS-5652.
- 2-in-1 Family Kid & Aladdin 4
- Super Cool Boy 4-in-1 (CB-4034) (commonly-available ROM file has been hacked to run as INES Mapper 044)
- Super Cool Boy 4-in-1 (CB-4035)
- Super 4-in-1 1998 (JH-274)
- 1998 HIGH 4-in-1 (YH-463)
Mode Register ($6000, write)
Mask: $E003 D~7654 3210 --------- LDcp C... |||| +---- CHR-ROM banking mode |||| 0: MMC3 (inner banks from $8000.0-$8000.5) |||| 1: CNROM (8 KiB inner bank from $6002) |||+------ PRG A19 ||+------- CHR A19 |+-------- CPU $8000-$FFFF mode | 0: PRG-ROM | 1: Read solder pad setting +--------- $6xxx Register Lock (except $6002.0-1) 0: unlocked 1: locked, further writes ignored until reset
Outer Bank Register ($6001, write)
Mask: $E003 D~7654 3210 --------- NcCC npPP |||| ||++- PRG A18..17 |||| |+--- Outer PRG Bank Size |||| | 0: 256 KiB, PRG A17 from MMC3 |||| | 1: 128 KiB, PRG A17 from $6001 bit 0 |||| +---- PRG A14 mode in NROM mode ($6001 bit 7=1) |||| 0: PRG A14=CPU A14 (NROM-256) |||| 1: PRG A14=MMC3 PRG A14 (NROM-128) ||++------ CHR A18..17 |+-------- Outer CHR Bank Size | 0: 256 KiB, CHR A17 from MMC3 | 1: 128 KiB, CHR A17 from $6001 bit 4 +--------- PRG-ROM banking mode 0: MMC3 1: NROM
In NROM mode, the MMC3 clone's CPU A13 and A14 inputs are held low, so that MMC3 register 6 applies to the entire CPU $8000-$FFFF range, with PRG A13 substituted by CPU A13 and PRG A14 subject to $6001.3.
CNROM register ($6002, write)
Mask: $E003
Contains the 8 KiB CHR-ROM bank if $6000.3=1, masked to 128 or 256 KiB according to $6000.6. Bits 0-1 respond even if the "Lock" bit is set, while changes to bits 2-7 will be ignored if the "Lock" bit has been set.
Unknown Register ($6003, write)
Mask: $E003
MMC3-compatible registers ($8000-$FFFF)
Mask: $E001 See MMC3.