Delay code
From NESdev Wiki
Jump to navigationJump to search
Delay code
Functions that cause a parametrised number of cycles of delay.
Note that all branch instructions are written assuming that no page wrap occurs. If you want to ensure this condition at compile time, use the bccnw/beqnw/etc. macros that are listed at Fixed cycle delay.
25..280 cycles of delay
;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A clocks + overhead
; Preserved: X, Y
; Time: A+25 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
: sbc #7 ; carry set by CMP
delay_a_25_clocks:
cmp #7
bcs :- ; do multiples of 7
lsr a ; bit 0
bcs :+
; A=clocks/2, either 0,1,2,3
beq @zero ; 0: 5
lsr a
beq :+ ; 1: 7
bcc :+ ; 2: 9
@zero: bne :+ ; 3: 11
: rts ; (thanks to dclxvi for the algorithm)
33..65568 cycles of delay
;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A:X clocks+overhead
; Time: 256*A+X+33 clocks (including JSR)
; Clobbers A. Preserves X,Y. Has relocations.
;;;;;;;;;;;;;;;;;;;;;;;;
: ; do 256 cycles. ; 5 cycles done so far. Loop is 2+1+ 2+3+ 1 = 9 bytes.
sbc #1 ; 2 cycles - Carry was set from cmp
pha ; 3 cycles
lda #(256-25-10-2-4) ; +2
jsr delay_a_25_clocks
pla ; 4 cycles
delay_256a_x_33_clocks:
cmp #1 ; +2; 2 cycles overhead
bcs :- ; +2; 4 cycles overhead
; 0-255 cycles remain, overhead = 4
txa ; +2; 6; +27 = 33
; 15 + JSR + RTS overhead for the code below. JSR=6, RTS=6. 15+12=27
; ; Cycles Accumulator Carry flag
; ; 0 1 2 3 4 (hex) 0 1 2 3 4
sec ; 0 0 0 0 0 00 01 02 03 04 1 1 1 1 1
: sbc #5 ; 2 2 2 2 2 FB FC FD FE FF 0 0 0 0 0
bcs :- ; 4 4 4 4 4 FB FC FD FE FF 0 0 0 0 0
lsr a ; 6 6 6 6 6 7D 7E 7E 7F 7F 1 0 1 0 1
bcc :+ ; 8 8 8 8 8 7D 7E 7E 7F 7F 1 0 1 0 1
: sbc #$7E ;10 11 10 11 10 FF FF 00 00 01 0 0 1 1 1
bcc :+ ;12 13 12 13 12 FF FF 00 00 01 0 0 1 1 1
beq :+ ; 14 15 14 00 00 01 1 1 1
bne :+ ; 16 01 1
: rts ;15 16 17 18 19 (thanks to dclxvi for the algorithm)
;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A:X clocks+overhead
; Time: 256*A+X+33 clocks (including JSR)
; Clobbers A,Y. Preserves X. No relocations.
; Does not depend on delay_a_25_clocks.
;;;;;;;;;;;;;;;;;;;;;;;;
: ; do 256 cycles. ; 5 cycles done so far. Loop is 2+2+1+2+2 = 9 bytes.
sbc #1 ; 2 cycles - Carry was set from cmp
ldy #48 ;\
dey ; |- Clobbers Y; 246 cycles, 253 total
bpl *-1 ;/
ldy $A4 ; ; 3 cycles, 256 total
delay_256a_x_33_clocks_b:
cmp #1 ; +2; 2 cycles overhead
bcs :- ; +2; 4 cycles overhead
; 0-255 cycles remain, overhead = 4
txa ; +2; 6; +27 = 33
; 15 + JSR + RTS overhead for the code below. JSR=6, RTS=6. 15+12=27
; ; Cycles Accumulator Carry flag
; ; 0 1 2 3 4 (hex) 0 1 2 3 4
sec ; 0 0 0 0 0 00 01 02 03 04 1 1 1 1 1
: sbc #5 ; 2 2 2 2 2 FB FC FD FE FF 0 0 0 0 0
bcs :- ; 4 4 4 4 4 FB FC FD FE FF 0 0 0 0 0
lsr a ; 6 6 6 6 6 7D 7E 7E 7F 7F 1 0 1 0 1
bcc :+ ; 8 8 8 8 8 7D 7E 7E 7F 7F 1 0 1 0 1
: sbc #$7E ;10 11 10 11 10 FF FF 00 00 01 0 0 1 1 1
bcc :+ ;12 13 12 13 12 FF FF 00 00 01 0 0 1 1 1
beq :+ ; 14 15 14 00 00 01 1 1 1
bne :+ ; 16 01 1
: rts ;15 16 17 18 19 (thanks to dclxvi for the algorithm)
;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A:X clocks+overhead
; Time: 256*A+X+33 clocks (including JSR)
; Clobbers A. Preserves X,Y. No relocations.
; Does not depend on delay_a_25_clocks.
;;;;;;;;;;;;;;;;;;;;;;;;
: ; do 256 cycles. ; 5 cycles done so far. Loop is 2+1+ 1+2+1+2+1 + 1+1 = 12 bytes.
sbc #1 ; 2 cycles - Carry was set from cmp
pha ;\
txa ; |
ldx #46 ; |
dex ; |- ; 247 cycles, 254 total
bpl *-1 ; |
tax ; |
pla ;/
nop ; 2 cycles; 256 cycles total
delay_256a_x_33_clocks_c:
cmp #1 ; +2; 2 cycles overhead
bcs :- ; +2; 4 cycles overhead
; 0-255 cycles remain, overhead = 4
txa ; +2; 6; +27 = 33
; 15 + JSR + RTS overhead for the code below. JSR=6, RTS=6. 15+12=27
; ; Cycles Accumulator Carry flag
; ; 0 1 2 3 4 (hex) 0 1 2 3 4
sec ; 0 0 0 0 0 00 01 02 03 04 1 1 1 1 1
: sbc #5 ; 2 2 2 2 2 FB FC FD FE FF 0 0 0 0 0
bcs :- ; 4 4 4 4 4 FB FC FD FE FF 0 0 0 0 0
lsr a ; 6 6 6 6 6 7D 7E 7E 7F 7F 1 0 1 0 1
bcc :+ ; 8 8 8 8 8 7D 7E 7E 7F 7F 1 0 1 0 1
: sbc #$7E ;10 11 10 11 10 FF FF 00 00 01 0 0 1 1 1
bcc :+ ;12 13 12 13 12 FF FF 00 00 01 0 0 1 1 1
beq :+ ; 14 15 14 00 00 01 1 1 1
bne :+ ; 16 01 1
: rts ;15 16 17 18 19 (thanks to dclxvi for the algorithm)
30..65565 cycles of delay
;;;;;;;;;;;;;;;;;;;;;;;; ; Delays X:A clocks+overhead ; Time: 256*X+A+30 clocks (including JSR) ; Clobbers A,X. Preserves Y. Has relocations. ;;;;;;;;;;;;;;;;;;;;;;;; delay_256x_a_30_clocks: cpx #0 ; +2 beq delay_a_25_clocks ; +3 (25+5 = 30 cycles overhead) ; do 256 cycles. ; 4 cycles so far. Loop is 1+1+ 2+3+ 1+3 = 11 bytes. dex ; 2 cycles pha ; 3 cycles lda #(256-25-9-2-7) ; +2 jsr delay_a_25_clocks pla ; 4 jmp delay_256x_a_30_clocks ; 3.
16..65296 cycles of delay
;;;;;;;;;;;;;;;;;;;;;;;; ; Delays A*256 clocks + overhead ; Preserved: X, Y ; Time: A*256+16 clocks (including JSR) ;;;;;;;;;;;;;;;;;;;;;;;; delay_256a_16_clocks: cmp #0 bne :+ rts delay_256a_11_clocks_: : pha lda #256-19-22 jsr delay_a_25_clocks pla clc adc #-1&$FF bne :- rts
31..65566 cycles of delay
;;;;;;;;;;;;;;;;;;;;;;;; ; Delays A:X clocks+overhead ; Time: 256*A+X+31 clocks (including JSR) ; Clobbers A. Preserves X,Y. Has relocations. ;;;;;;;;;;;;;;;;;;;;;;;; : ; do 256 cycles. ; 5 cycles done so far. Loop is 2+1+ 2+3+ 1 = 9 bytes. sbc #1 ; 2 cycles - Carry was set from cmp pha ; 3 cycles lda #(256-25-10-2-4) ; +2 jsr delay_a_25_clocks pla ; 4 cycles delay_256a_x_31_clocks: cmp #1 ; +2; 2 cycles overhead bcs :- ; +2; 4 cycles overhead ; 0-255 cycles remain, overhead = 4 txa ; +2; 6; +25 = 31 ;passthru <<Place the function delay_a_25_clocks immediately following here>>
