Talk:CPU power up state

Parts of the APU which appear to be affected by reset (determined by tracing the reset signal throughout the chip):

• Square channel volume/envelope rate ($4000/$4004 bits 0-3), maybe - it might only affect the internal timer used for decrementing the envelope counter
• Noise channel volume/envelope rate ($4008 bits 0-3), maybe - see above
• Square channel frequency counter, including the 3 duty cycle bits
• Triangle channel frequency counter
• Noise channel frequency counter, sort of - it looks to force the LFSR input to 0, so a very short reset pulse might only partially clear it
• DPCM channel frequency counter, sort of - it looks to force the LFSR input to 0, so a very short reset pulse might only partially clear it
• Noise channel frequency ($400E bits 0-3)
• Square channel sweep counter
• All 4 length counters
• Triangle channel linear counter ($4008), maybe - it might only affect the counter itself, not the reload value
• Triangle channel Position
• DPCM channel Sample Length counter (not the reload value)
• DPCM channel Position ($4011)
• DPCM channel Sample Buffer and Bit Counter
• DPCM channel Sample Address counter (not the reload value)
• DPCM channel state machine
• Sprite DMA address counter and state machine
• Part of the Frame Counter (notably, not the two writable bits of $4017)
• Debug register $401A bit 7

--Quietust 16:40, 8 June 2011 (UTC)