INES Mapper 206

iNES Mapper 206 is a stripped-down version of MMC3 used by Tengen and Namco. Chips used include "Tengen MIMIC-1" and "Namcot 118". Many ROMS using this mapper are incorrectly listed as using MMC3, but will usually work if emulated with MMC3, and the mirroring is correct.

Compared to MMC3:

• There are no IRQs
• There is no WRAM support
• PRG always has the last two 8k banks fixed to the end.
• CHR always gives the left pattern table (0000-0FFF) the two 2k banks, and the right pattern table (1000-1FFF) the four 1k banks.
• Mirroring is hardwired, one game uses 4-screen mirroring (Gauntlet).
• CHR size limit is 64k, PRG size limit is 128k.

Registers:

• $8000: 00000xxx - Select which internal register gets written by $8001
• $8001: 00xxxxxx - Value written to the internal register. PRG registers use only 4 bits.

Internal registers:

• 0, 1: 2k CHR banks at 0000, 0800. Least significant bit is ignored.
• 2, 3, 4, 5: 1k CHR banks at 1000, 1400, 1800, 1C00.
• 6, 7: 8k PRG banks at 8000, A000.

References

• FCEUX source code