User:Persune

Hello! I usually write music, or work on hardware/software projects for the Famicom. From time to time, I like to investigate certain aspects of the Famicom, be it audio, video, or otherwise.

TODO:
  - learn wiki markup
  - write and publish personal research here:

      - Famicom cartridge PCB measurements, dimensions and footprints
        https://www.nesdev.org/wiki/Famicom_cartridge_dimensions
          Completed so far:
            - FC HVC-TGROM-01
            - FC HVC-CNROM-256K-01
            - TODO: publish HVC-ETROM-01 measurements

      - NES cartridge PCB measurements, dimensions and footprints
        https://www.nesdev.org/wiki/NES_cartridge_dimensions
          Completed so far:
            - NES-EWROM-01
            - TODO: measure unlicensed cartridge PCBs

      - NES/Famicom equivalent opamp amplifier gain
            - TODO: RF Famicom HVC-CPU-07, RF Famicom HVC-GPN rev, AV Famicom HVCN-CPU rev, Sharp Twin Famicom rev

Some bits i'm drafting:

Famicom EPSM access

Due to the lack of EXP pins on the Famicom's cartridge pinout, an equivalent version does not have direct access to any of the methods above.

For the universal $4016 access, one may directly connect OUT1 from pin 11 of the Famicom's expansion port to the EPSM, or replicate OUT1 by latching $4016.D1 writes with external circuitry.

For the memory mapped access, a 2x15 pin header may be provided with the signals required for use with an external daughterboard.

    EPSM    | Daughterboard  |    EPSM
            +----------------\
     GND -- |01            02| -- +5V
 CPU A11 -> |03            04| <- M2
 CPU A10 -> |05            06| <- CPU A12
  CPU A9 -> |07            08| <- CPU A13
  CPU A8 -> |09            10| <- CPU A14
  CPU A7 -> |11            12| -- NC 
  CPU A6 -> |13            14| -> YMF288 A1
  CPU A5 -> |15            16| -> YMF288 A0
  CPU A4 -> |17            18| -> EPSM CE1
  CPU A3 -> |19            20| -> EPSM /CE2
  CPU A2 -> |21            22| -> EPSM /CE3
  CPU A1 -> |23            24| -- NC
  CPU A0 -> |25            26| -- NC
 CPU R/W -> |27            28| <- /ROMSEL
      NC -- |29            30| -- NC
            +----------------/

Famicom / NES cartridge measurements

Label measurements

Note that these measure the dimensions of the label stickers themselves, not the allocated area on the plastic shell.

Front label measurements

Famicom 1st party short shells (SMB3 JP HVC-UM) - 90mm x 45.5mm

Famicom 1st party tall shells (Nobunaga no Yabou: Sengoku Gunyuuden KOE-NU) - 95mm x 53.5mm

NES shell (Romance of the Three Kingdoms II NES-XL-USA) - 50mm x 96.5mm

Back label measurements

Famicom 1st party short shells (SMB3 JP HVC-UM) - 99.5mm x 28.5mm

Famicom 1st party tall shells (Nobunaga no Yabou: Sengoku Gunyuuden KOE-NU) - 99.5mm x 28.5mm

NES shell (Romance of the Three Kingdoms II NES-XL-USA) - 78.5mm x 31mm