NES 2.0 Mapper 432
From NESdev Wiki
Jump to navigationJump to search
NES 2.0 Mapper 432 denotes the MMC3-based Realtec 8090 multicart circuit board.
- 3-in-1 High Standerd [sic] (DP-33)
- 160000000-in-1 (unknown cartridge code)
Solder Pad Enable Register ($6000-$7FFE, even)
Mask: $E001 D~7654 3210 --------- .... ...S +- 1=Replace PRG-ROM with solder pad value in the CPU $8000-$FFFF address range
Outer Bank Register ($6001-$7FFF, odd)
Mask: $E001 D~7654 3210 --------- ?NQP CmMb ||| |||+- PRG/CHR A17 if M=1 ||| ||+-- PRG A17 mode ||| || 0: from MMC3 (256 KiB inner bank) ||| || 1: from b (128 KiB inner bank) ||| |+--- CHR A17 mode ||| | 0: from MMC3 (256 KiB inner bank) ||| | 1: from b (128 KiB inner bank) ||| +---- CHR A18 ||+------ PRG A18 |+------- PRG+CHR A19 +-------- NROM-128 mode (1=enabled)
As it uses the MMC3 clones's WRAM interface, writing to the outer bank register requires enabling and not write-protecting WRAM in the MMC's $A001 register. NROM-128 mode forces the MMC3 clone's CPU A14 input low, causing MMC3 register 6 to select both the bank at $8000 and $C000, and register 7 to select both the bank at $A000 and $E000.
MMC3-compatible registers ($8000-$FFFF)
Mask: $E001
See MMC3.