Talk:Mirroring
From NESdev Wiki
Jump to navigationJump to search
PAxx vs. PPU Axx vs. CHR Axx
These edits by infiniteneslives confuse me a bit. I've seen "CHR A10" and "CHR A11" used for the lines going to the CHR ROM. In ASIC mappers, these tend not to match PPU A10 (PA10 for short) and PPU A11 (PA11). --Tepples (talk) 12:04, 23 February 2013 (MST)
"L" mirroring
Using a single and-or-invert gate, or three NAND or NOR gates, along with two bits from a latch gets you controllable 1/H/V/L mirroring. This is roughly what mapper 243 does. —Lidnariq (talk) 00:32, 4 May 2013 (MDT)
nnqc mdi rb
agbosenb wgkkxouo ytevoszm ozxbjbxj ysrvmpsv dxgqjoua gkbwhrlt
