NES 2.0 Mapper 357: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
mNo edit summary
(Move Mr. Mary 2 mapper description from 043 to here.)
Line 1: Line 1:
{{DEFAULTSORT:357}}[[Category:Multicart mappers|357]][[Category:Mappers with CHR RAM|357]][[Category:FDS conversion mappers|357]][[Category:Mappers with cycle IRQs|357]]NES 2.0 Mapper 357 is used for a 4-in-1 multicart (cartridge ID 4602) from Bit Corp. It's basically a combination of the ''Mr. Mary 2'' variant of [[INES Mapper 043]] and [[UNROM]].
{{DEFAULTSORT:357}}[[Category:Multicart mappers|357]][[Category:Mappers with CHR RAM|357]][[Category:FDS conversion mappers|357]][[Category:Mappers with cycle IRQs|357]]'''NES 2.0 Mapper 357''' is used for a ''4-in-1'' multicart (cartridge ID ''4602'') from Bit Corp. The first game is Bit Corp's hack of the [[NES 2.0 Mapper 368|YUNG-08]] conversion of ''Super Mario Brothers 2 (J)'' named ''Mr. Mary 2'', the other three games are [[UNROM]] games.


Unlike most multicarts, there is no menu; instead, the desired game is selected via two DIP Switches on the cartridge itself. The DIP switches directly select the outer 128 KiB PRG-ROM bank, game-specific nametable mirroring and mapper mode --- outer bank 0 selects [[INES Mapper 043]] mode, all others select [[UNROM]] mode. All four games use 8 KiB of unbanked CHR-RAM. Mirroring is Vertical for banks 0-2 and Horizontal for bank 3.
Unlike most multicarts, there is no menu; instead, the desired game is selected via two DIP Switches that protrude through the cartridge shell. The DIP switches directly select the outer 128 KiB PRG-ROM bank, game-specific nametable mirroring and mapper mode --- outer bank 0 selects SMB2J mode, all others select [[UNROM]] mode. All four games use 8 KiB of unbanked CHR-RAM. Mirroring is Vertical for banks 0-2 and Horizontal for bank 3.
 
=Banks in SMB2J mode=
* CPU $5000-$5FFF: 4 KiB PRG-ROM bank, fixed to #16
* CPU $6000-$7FFF: 8 KiB PRG-ROM bank, [[#PRG_Bank_Select_2_.28.244120.2C_write.29]]
* CPU $8000-$9FFF: 8 KiB PRG-ROM bank, fixed to #1
* CPU $A000-$BFFF: 8 KiB PRG-ROM bank, fixed to #0
* CPU $C000-$DFFF: 8 KiB PRG-ROM bank, switchable
* CPU $E000-$FFFF: 8 KiB PRG-ROM bank, [[#PRG_Bank_Select_2_.28.244120.2C_write.29]]
* PPU $0000-$1FFF: unbanked 8 KiB CHR-RAM
 
=Registers in SMB2J mode=
==PRG Bank Select 1 ($4022, write)==
Mask: probably $71FF
Bit 7654 3210
    ---------
    .... .CCC
          +++- Select 8 KiB PRG-ROM bank at CPU $C000-$DFFF.
 
The actual bank number is:
Value  Bank#
------------
0      4
1      3
2      5
3      3
4      6
5      3
6      7
7      3
 
==PRG Bank Select 2 ($4120, write)==
Mask: probably $71FF
Bit 7654 3210
    ---------
    .... ...I
            +- 0: CPU $6000-$7FFF to bank 2,
                  CPU $E000-$FFFF to bank 10
                1: CPU $6000-$7FFF to bank 0,
                  CPU $E000-$FFFF to bank 8
 
==IRQ Control ($4122)==
Mask: probably $F1FF
Bit 7654 3210
    ---------
    .... ...I
            +- 0: Acknowledge and disable IRQ, reset counter
                1: Enable IRQ
 
When enabled, the 12-bit IRQ counter increases on every M2 cycle until it overflows, upon which an IRQ is fired.


=See also=
=See also=
[https://forums.nesdev.org/viewtopic.php?f=9&t=17399 PCB image analysis]
[https://forums.nesdev.org/viewtopic.php?f=9&t=17399 PCB image analysis]

Revision as of 22:04, 26 August 2019

NES 2.0 Mapper 357 is used for a 4-in-1 multicart (cartridge ID 4602) from Bit Corp. The first game is Bit Corp's hack of the YUNG-08 conversion of Super Mario Brothers 2 (J) named Mr. Mary 2, the other three games are UNROM games.

Unlike most multicarts, there is no menu; instead, the desired game is selected via two DIP Switches that protrude through the cartridge shell. The DIP switches directly select the outer 128 KiB PRG-ROM bank, game-specific nametable mirroring and mapper mode --- outer bank 0 selects SMB2J mode, all others select UNROM mode. All four games use 8 KiB of unbanked CHR-RAM. Mirroring is Vertical for banks 0-2 and Horizontal for bank 3.

Banks in SMB2J mode

Registers in SMB2J mode

PRG Bank Select 1 ($4022, write)

Mask: probably $71FF

Bit 7654 3210
    ---------
    .... .CCC
          +++- Select 8 KiB PRG-ROM bank at CPU $C000-$DFFF.

The actual bank number is:

Value  Bank#
------------
0      4
1      3
2      5
3      3
4      6
5      3
6      7
7      3

PRG Bank Select 2 ($4120, write)

Mask: probably $71FF

Bit 7654 3210
    ---------
    .... ...I
            +- 0: CPU $6000-$7FFF to bank 2,
                  CPU $E000-$FFFF to bank 10
               1: CPU $6000-$7FFF to bank 0,
                  CPU $E000-$FFFF to bank 8

IRQ Control ($4122)

Mask: probably $F1FF

Bit 7654 3210
    ---------
    .... ...I
            +- 0: Acknowledge and disable IRQ, reset counter
               1: Enable IRQ

When enabled, the 12-bit IRQ counter increases on every M2 cycle until it overflows, upon which an IRQ is fired.

See also

PCB image analysis